Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Transfer Research
Facteur d'impact: 0.404 Facteur d'impact sur 5 ans: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561

Volumes:
Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2014007106
pages 179-193

WALL CONTACT THERMAL RESISTANCE AND BULK THERMAL CONDUCTIVITY IN ACTIVATED CARBON FOR ADSORPTION GENERATORS

Angeles M. Rivero Pacho
The University of Warwick
Robert E. Critoph
School of Engineering, University of Warwick, Coventry CV4 7AL, UK

RÉSUMÉ

It is acknowledged that the commercial success of the adsorption heat pump or refrigeration systems depends crucially on heat and mass transfer in the sorbent bed. Good heat and mass transfer allows one to obtain greater specific heating or cooling power which reduces the capital costs. This study surveys the previously reported data on heat transfer in activated carbon beds, compares it with newly measured data, and draws conclusions on the way that the wall geometry, particle size distribution, and the bulk density affect the overall thermal performance. The thermal conductivity technique used in this study is a steady-state measurement in a heated plate device.


Articles with similar content:

Study on the Compact Steam Dump Device Development for the Damage Reduction of the Condenser Tube
International Heat Transfer Conference 15, Vol.3, 2014, issue
HyunSoo Kim, Jong-Wook Lee, Won-Seok Kim
A NUMERICAL STUDY ON THE EFFECTS OF THE HEAT SPREADER THICKNESS AND THE HEAT SINK SIZE ON THE THERMAL PERFORMANCE OF A COOLING DEVICE FOR A CPV MODULE
First Thermal and Fluids Engineering Summer Conference, Vol.7, 2015, issue
Tae Hoon Kim, Yong-Shik Han, Byung-ll Choi , Myung-Bae Kim, Kyu Hyung Do
Two phase flow redistribution in a two-layered porous medium with contrasting permeability
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2017, issue
Michel Quintard, Florian Fichot, Ali Swaidan
IMPROVEMENTS OF NEWLY DEVELOPED ADSORPTION HEAT PUMPS GENERATING HIGH TEMPERATURE STEAM FROM WASTED HOT WATER
Second Thermal and Fluids Engineering Conference, Vol.15, 2017, issue
Koichi Nakaso, Jun Fukai, X.L. Wei, Bing Xue, M. Sawada, M. Nagayama, Agung Tri Wijayanta
Experimental Investigation of High-Power Gas Discharge Radiation Sources
Heat Transfer Research, Vol.29, 1998, issue 6-8
V. B. Petrikevich