Facteur d'impact:
0.404
Facteur d'impact sur 5 ans:
0.8
SJR:
0.264
SNIP:
0.504
CiteScore™:
0.88
ISSN Imprimer: 1064-2285
Volumes:
Numéro 1
Numéro 2
Numéro 3
Numéro 4
Numéro 5
Numéro 6
Numéro 7
Numéro 8
Numéro 9
Numéro 10
Numéro 11
Numéro 12
Numéro 13
Numéro 14
Numéro 15
Numéro 16
Numéro 17
Numéro 18
Numéro 1
Numéro 2
Numéro 3
Numéro 4
Numéro 5
Numéro 6
Numéro 7
Numéro 8
Numéro 9
Numéro 10
Numéro 11
Numéro 12
Numéro 13
Numéro 14
Numéro 15
Numéro 16
Numéro 17
Numéro 18
Numéro 1
Numéro 2
Numéro 3
Numéro 4
Numéro 5
Numéro 6
Numéro 7
Numéro 8
Numéro 9
Numéro 10
Numéro 11
Numéro 12
Numéro 13
Numéro 14
Numéro 15
Numéro 16
Numéro 17
Numéro 18
Numéro 1
Numéro 2
Numéro 3
Numéro 4
Numéro 5
Numéro 6
Numéro 7
Numéro 8
Numéro 9
Numéro 10
Numéro 11
Numéro 12
|
Heat Transfer Research
DOI: 10.1615/HeatTransRes.2016008510
pages 121-138 NUMERICAL STUDY OF MHD NATURAL CONVECTION LIQUID METAL FLOW AND HEAT TRANSFER IN A WAVY ENCLOSURE USING CVFEM
Mohsen Sheikholeslami
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran; Renewable Energy Systems and Nanofluid Applications in Heat Transfer Laboratory, Babol Noshirvani University of Technology, Babol, Iran
Puneet Rana
Jaypee Institute of Information Technology, Noida
Soheil Soleimani
Department of Mechanical and Materials Engineering, Florida International University, Miami, Florida 33174, USA RÉSUMÉA comprehensive numerical investigation on natural convection of electrically conducting liquid metal flow and heat transfer characteristics in a wavy enclosure is presented. The control volume-based finite element method (CVFEM) has been adopted to solve numerically the governing conservation equations of mass, momentum, and energy by using a stream function vorticity formulation. Special attention is given to understand the effect of a transverse magnetic field on the heat transfer rate as well as flow configurations with different amplitudes of sinusoidal wall. The numerical procedure in this analysis yields consistent performance over a wide range of parameters; Hartmann number, Ha; Rayleigh number, Ra; dimensionless amplitude of sinusoidal wall, a, and a fixed Prandtl number (Pr = 0.025) for liquid metal. The results obtained are depicted in terms of streamlines and isotherms which show the significant effects of the Hartmann number on the fluid flow and temperature distribution inside the enclosure. It was found that the Nusselt number decreases with increase in the Hartmann number. Articles with similar content:
Natural Convection of Liquid Metals in an Inclined Enclosure in the Presence of a Magnetic Field
International Journal of Fluid Mechanics Research, Vol.31, 2004, issue 3 Ali F. Al-Mudhaf, Ali J. Chamkha
EFFECT OF MOVING FLAT PLATE ON HYDRO-MAGNETIC MIXED CONVECTION IN A POROUS ENCLOSURE WITH SINUSOIDAL HEATING SIDE WALLS AND INTERNAL HEAT GENERATION
Computational Thermal Sciences: An International Journal, Vol.9, 2017, issue 1 N. Nithyadevi, A. Shamadhani Begum
EFFECT OF LORENTZ FORCES ON NANOFLUID FLOW INSIDE A POROUS ENCLOSURE WITH A MOVING WALL USING VARIOUS SHAPES OF CuO NANOPARTICLES
Heat Transfer Research, Vol.50, 2019, issue 7 Mohsen Sheikholeslami, M. M. Bhatti, Zhixiong Li
MHD MIXED CONVECTION IN TRAPEZOIDAL ENCLOSURES FILLED WITH MICROPOLAR NANOFLUIDS
Nanoscience and Technology: An International Journal, Vol.9, 2018, issue 4 Sameh Elsayed Ahmed, Xiaohui Zhang, Zehba A. Raizah, M. A. Mansour, Ahmed Kadhim Hussein
NUMERICAL STUDY ON TRANSIENT MIXED CONVECTION AND ENTROPY GENERATION IN AN SKEWED VENTILATED ENCLOSURE
3rd Thermal and Fluids Engineering Conference (TFEC), Vol.22, 2018, issue Neha Gupta, A. K. Nayak |
Portail numérique | Bibliothèque numérique | eBooks | Revues | Références et comptes rendus | Collections |