Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Transfer Research
Facteur d'impact: 0.404 Facteur d'impact sur 5 ans: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561

Volumes:
Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v39.i3.30
pages 211-228

Modeling and Simulation of Solid Propellant Particle Path in the Combustion Chamber of a Solid Rocket Motor

Ryo S. Amano
Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, Wisconsin, USA
YuMin Xiao
ESI-CFD, Huntsville, AL 35803, Al, USA

RÉSUMÉ

In a solid rocket motor (SRM) using aluminized composite solid propellant and a submerged nozzle, a two-phase flow needs to be investigated by both experiment and computation. The boundary conditions for the ejecting particles constrain their trajectories, hence these affect the two-phase flow calculations, and thus significantly affect the evaluation of the slag accumulation. A new method to determine the velocities of particles on the solid propellant surface was developed in the present study, which is based on the RTR (X-ray Realtime Radiography) technique and coupled with the two-phase flow numerical simulation. A method was developed to simulate the particle ejection from the propellant surface. The moving trajectories of metal particles in a firing combustion chamber were measured by using the RTR high-speed motion analyzer. Image processing software was also developed for the RTR images, so the trajectories of particles could be obtained. Numerical simulations with different propellant-surface boundary conditions were performed to calculate particle trajectories. By comparing the two trajectories, an appropriate boundary condition on the propellant surface was referred. The present method can be extended to study the impingement of particles on a wall and other related two-phase flows.


Articles with similar content:

Study of flow in combustion chamber of solid rocket motor
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Y. Xiao, Ryo S. Amano
UTILIZATION OF MICRO X-RAY COMPUTED TOMOGRAPHY FOR THE QUALITY ASSURANCE OF GUN PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.15, 2016, issue 4
Paul Hungler, Catalin Florin Petre
A COMBINED FULLY LAGRANGIAN APPROACH TO MESH-FREE MODELLING OF TRANSIENT TWO-PHASE FLOWS
Atomization and Sprays, Vol.23, 2013, issue 1
Alexander N. Osiptsov, N. A. Lebedeva, Sergei S. Sazhin
IMAGING OF TRANSIENT FLUID FLOW AND THERMAL PHENOMENA IN COMMUNICATING CHANNELS
ICHMT DIGITAL LIBRARY ONLINE, Vol.18, 1992, issue
Debangshu Majumdar, Borivoje B. Mikic, Csilla Herman, Cristina H. Amon, Franz Mayinger
Prediction of the Interaction of Coolant Ejection with the Main Stream at the Leading Edge of a Turbine Blade: Attached Grid Application
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 1992, issue
E. Benz, Sigmar Wittig