Facteur d'impact sur 5 ans:
ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561
Volume 51, 2020
Volume 50, 2019
Volume 49, 2018
Volume 48, 2017
Volume 47, 2016
Volume 46, 2015
Volume 45, 2014
Volume 44, 2013
Volume 43, 2012
Volume 42, 2011
Volume 41, 2010
Volume 40, 2009
Volume 39, 2008
Volume 38, 2007
Volume 37, 2006
Volume 36, 2005
Volume 35, 2004
Volume 34, 2003
Volume 33, 2002
Volume 32, 2001
Volume 31, 2000
Volume 30, 1999
Volume 29, 1998
Volume 28, 1997
Heat Transfer Research
EXPERIMENTAL INVESTIGATION ON THERMAL PERFORMANCE OF THERMOSYPHON HEAT PIPE USING DOLOMITE/DEIONIZED WATER NANOFLUID DEPENDING ON NANOPARTICLE CONCENTRATION AND SURFACTANT TYPE
Duygu Yılmaz Aydın
Engineering Faculty, Chemical Engineering Department, Gazi University, Ankara, Turkey
Engineering Faculty, Chemical Engineering Department, Gazi University, Ankara, Turkey
Gazi University, Faculty of Technology, Department of Energy System Engineering, Ankara,
The conventional fluids used for heat transfer cannot provide the desired thermal performance due to their poor heat transfer characteristics. Disadvantages of the base fluids can be overcome by forming a suspension of nanoparticles with the base fluid. In this work, the effects of using dolomite/deionized water nanofluid on the thermal performance of thermosyphon heat pipe were experimentally investigated. Nanoparticle concentration and surfactant type (sodium dodecyl benzene sulfonate (SDBS), Triton X-100) were studied as parameters. Three different cooling water mass flow rates (5, 7.5, and 10 g/s) were used in experiments with different heating powers (200, 300, and 400 W) to test heat pipe performance. The results indicated that nanoparticle concentration is an effective parameter in the performance of nanofluids, and SDBS exhibit more favorable characteristics than Triton X-100 as a surfactant. The 36.84% decrease in thermal resistance was observed compared to deionized water and enhancement of 38.75% was achieved in heat pipe efficiency using of dolomite nanofluid containing 2% of dolomite nanoparticle and 0.5% of SDBS under a heating power of 200 W and cooling water mass flow rate of 5 g/s.
Aparna, Z., Ghosh, S., and Pabi, S.K., Influence of Container Material on the Heat Transfer Characteristics of Nanofluids, Exp. Heat Transf., vol. 30, pp. 302-315, 2017.
Babita, Sharma, S.K., and Gupta, S.M., Preparation and Evaluation of Stable Nanofluids for Heat Transfer Application: A Review, Exp. Therm. Fluid Sci., vol. 79, pp. 202-212, 2016.
Buschmann, M.H., Nanofluids in Thermosyphons and Heat Pipes: Overview of Recent Experiments and Modeling Approaches, Int. J. Therm. Sci, vol. 72, pp. 1-17, 2014.
Chopkar, M., Sudarshan, S., Das, P.K., and Manna I., Effect of Particle Size on Thermal Conductivity of Nanofluid, Metall. Mater. Trans. A, vol. 39, pp. 1535-1542, 2008.
Ganvir, R.B., Walke, P.V., and Kriplani, V.M., Heat Transfer Characteristics in Nanofluid-A Review, Renew. Sustain. Energy Rev, vol. 75, pp. 451-460, 2017.
Gupta, M., Singh, V., Kumar, R., and Said, Z., A Review on Thermophysical Properties of Nanofluids and Heat Transfer Applications, Renew. Sustain. Energy Rev., vol. 74, pp. 638-670, 2017.
Gupta, N.K., Tiwar, A.K., and Ghosh, S.K., Heat Transfer Mechanisms in Heat Pipes Using Nanofluids-A Review, Exp. Therm. Fluid Sci, vol. 90, pp. 84-100, 2018.
Guru, M., Sozen, A., Karakaya, U., and Qiftfi, E., Influences of Bentonite-Deionized Water Nanofluid Utilization at Different Concentrations on Heat Pipe Performance: An Experimental Study, Appl. Therm. Eng., vol. 148, pp. 632-640, 2019.
Huminic, G. and Huminic, A., Heat Transfer Characteristics of a Two-Phase Closed Thermosyphons Using Nanofluids, Exp. Therm. Fluid Sci., vol. 35, no. 3, pp. 550-557, 2011.
Huminic, G., Huminic, A., Morjan, I., and Dumitrache, F., Experimental Study of the Thermal Performance of Thermosyphon Heat Pipe Using Iron Oxide Nanoparticles, Int. J. Heat Mass Transf., vol. 54, pp. 656-661, 2011.
Ilhan, B., Kurt, M., and Erturk, H., Experimental Investigation of Heat Transfer Enhancement and Viscosity Change of hBN Nanofluids, Exp. Therm. Fluid Sci., vol. 77, pp. 272-283, 2016.
Kamyar, A., Ong, K., and Saidur, S.R., Effects of Nanofluids on Heat Transfer Characteristics of a Two-Phase Closed Thermosyphon, Int. J. Heat Mass Transf., vol. 65 pp. 610-618, 2013.
Khanlari, A., Aydin, D.Y., Sozen, A., and Variyenli H.I., Investigation of the Influences of Kaolin-Deionized Water Nanofluid on the Thermal Behavior of Concentric Type Heat Exchanger, Heat Mass Transf, 2019. DOI: 10.1007/s00231-019-02764-1.
Kim, S.H., Choi, S.R., and Kim, R., Thermal Conductivity of Metal-Oxide Nanofluids: Particle Size Dependence and Effect of Laser Irradiation, J. Heat Transf., vol. 129, no. 3, pp. 298-307, 2007.
Maheshwary, P.B., Handa, C.C., and Nemade, K.R., A Comprehensive Study of Effect of Concentration, Particle Size and Particle Shape on Thermal Conductivity of Titania/Water Based Nanofluid, Appl. Therm. Eng., vol. 119, pp. 79-88, 2017.
Noie, S.H., Heris, S.Z., Kahani, M., and Nowee, S.M., Heat Transfer Enhancement Using Al2O3/Water Nanofluid in a Two-Phase Closed Thermosyphon, Int. J. Heat Fluid Flow, vol. 30, pp. 700-705, 2009.
Ozsoy, A. and Qorumlu, V., Thermal Performance of a Thermosyphon Heat Pipe Evacuated Tube Solar Collector Using Silver-Water Nanofluid for Commercial Applications, Renew. Energy, vol. 122, pp. 26-34, 2018.
Pryazhnikov, M.I., Minakov, A.V., Rudyak, V.Ya., and Guzei, D.V., Thermal Conductivity Measurements of Nanofluids, Int. J. Heat Mass Transf., vol. 104, pp. 1275-1282, 2017.
Saleh, R., Putra, N., Prakoso, S.P., and Septiadi, W.N., Experimental Investigation of Thermal Conductivity and Heat Pipe Thermal Performance of ZnO Nanofluids, Int. J. Therm. Sci., vol. 63, pp. 125-132, 2013.
Sarafraz, M.M. and Hormozi, F., Experimental Study on the Thermal Performance and Efficiency of a Copper Made Thermosyphon Heat Pipe Charged with Alumina-Glycol Based Nanofluids, Powder Technol., vol. 266, pp. 378-387, 2014.
Sarafraz, M.M., Hormozi, F., and Peyghambarzadeh, S.M., Thermal Performance and Efficiency of a Thermosyphon Heat Pipe Working with a Biologically Ecofriendly Nanofluid, Int. Commun. Heat Mass Transf., vol. 57, pp. 297-303, 2014.
She, L. and Fan, G., Numerical Simulation of Flow and Heat Transfer Characteristics of CuO-Water Nanofluids in a Flat Tube, Front. Energy Res., vol. 6, p. 57, 2018.
Sozen, A., Guru, M., Khanlari, A., and Qiftfi, E., Experimental and Numerical Study on Enhancement of Heat Transfer Characteristics of a Heat Pipe Utilizing Aqueous Clinoptilolite Nanofluid, Appl. Therm. Eng., vol. 160, p. 114001, 2019.
Sozen, A., Guru, M., Menlik, T., Karakaya, U., and Ciftfi, E., Experimental Comparison of Triton X-100 and Sodium Dodecyl Benzene Sulfonate Surfactants on Thermal Performance of TiO2 Deionized Water Nanofluid in a Thermosiphon, Exp. Heat Transf., vol. 3, no. 5, pp. 450-469, 2018.
Sozen, A., Menlik, T., Aktas, M., and Guru, M., Utilization of Blast Furnace Slag Nano-Fluids in Two-Phase Closed Thermo-Syphon Heat Pipes for Enhancing Heat Transfer, Exp. Heat Transf., vol. 30, no. 2, pp. 112-125, 2017.
Sozen, A., Menlik, T., Guru, M., Boran, K., Kilif, F., Aktas, M., and Cakir, M.T., A Comparative Investigation on the Effect of Fly-Ash and Alumina Nanofluids on the Thermal Performance of Two-Phase Closed Thermo-Syphon Heat Pipes, Appl. Therm. Eng., vol. 96, pp. 330-337, 2016.
Suganthi, K.S. and Rajan, K.S., Metal Oxide Nanofluids: Review of Formulation, Thermo-Physical Properties, Mechanisms and Heat Transfer Performance, Renew. Sustain. Energy Rev., vol. 76, pp. 226-255, 2017.
Suganthi, K.S., Vinodhan, V.L., and Rajan, K.S., Heat Transfer Performance and Transport Properties of ZnO-Ethylene Glycol and ZnO-Ethylene Glycol-Water Nanofluid Coolants, Appl. Energy, vol. 135, pp. 548-559, 2014.
Sundar, L.S., Farooky, M.H., Sarada, S.N., and Singh, M.K., Experimental Thermal Conductivity of Ethylene Glycol and Water Mixture Based Low Volume Concentration of Al2O3 and CuO Nanofluids, Int. Commun. Heat Mass Transf., vol. 41, pp. 41-46, 2013.
Yang, L., Du, K., Zhang, X.S., and Cheng, B., Preparation and Stability of Al2O3 Nanoparticle Suspension of Ammonia-Water Solution, Appl. Therm. Eng., vol. 31, pp. 3643-3647, 2011.
Articles with similar content:
Investigation on the heat transfer performance of BeO-water nanofluid in an electronic cooling system
Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Vol.0, 2019, issue
Bindusai Morri, Vishnuprasad Selvaraj, Karthick Senthilkumar, Haribabu Krishnan
INVESTIGATION OF THE THERMAL PERFORMANCE OF MINIATURE LOOP HEAT PIPE WITH WATER-COPPER NANOFLUID
Heat Pipe Science and Technology, An International Journal, Vol.4, 2013, issue 3
Xiao-Wu Wang, Yanxiao Xu, Zhenping Wan, Yong Tang
HEAT TRANSFER AND FLUID FLOW STUDY OF CuO-W/EG(50:50) NANOFLUIDS THROUGH ALUMINIUM MICROCHANNELS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Dasaroju Gangacharyulu, Harkirat Sandhu