Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Transfer Research
Facteur d'impact: 1.199 Facteur d'impact sur 5 ans: 1.155 SJR: 0.267 SNIP: 0.503 CiteScore™: 1.4

ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561

Volumes:
Volume 51, 2020 Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v41.i7.50
pages 753-768

Investigation of Film-Cooled Rough Surfaces Using Large Eddy Simulation

Prasad Kalghatgi
Turbine Innovation and Energy Research (TIER) Center, College of Engineering, Louisiana State University Baton Rouge, LA 70803
Sumanta Acharya
Illinois Institute of Technology

RÉSUMÉ

In the present paper the effect of roughness on film cooling has been investigated numerically using Large Eddy Simulation (LES). A range of roughness parameters related to the momentum thickness of the crossflow boundary layer has been studied. A roughness element model is used for representing the microroughness over the film-cooled surfaces. Results for different roughness parameters are analyzed and compared with the baseline smooth case. Beyond 2 hole diameters of coolant injection, roughness is shown to reduce the cooling effectiveness.


Articles with similar content:

Investigation of Film Cooled Rough Surfaces using Large Eddy Simulation
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Sumanta Acharya, Prasad Kalghatgi
THE EFFECT OF COLD AIR JET INJECTION UPON THE FILM COOLING EFFECTIVENESS OF COMBUSTION CHAMBER WALLS FOR DIFFERENT INJECTION GEOMETRIES
International Heat Transfer Conference 7, Vol.6, 1982, issue
R. Best
Large-Eddy Simulations of trailing-edge cutback film cooling at low blowing ratio
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Hayder Schneider, Dominic von Terzi, Hans-Jorg Bauer
Experimental and Computational Film Cooling with Backward Injection for Cylindrical and Fan-Shaped Holes
International Heat Transfer Conference 15, Vol.20, 2014, issue
Shiou-Jiuan Li, Je-Chin Han, Wei-Hsiang Wang, Andrew F Chen
EXPERIMENTAL STUDY ON ARRANGEMENT EFFECTS OF INJECTION HOLES OF THE TURBINE BLADE LEADING EDGE ON THE FILM COOLING PERFORMANCE
International Heat Transfer Conference 13, Vol.0, 2006, issue
K.-S. Kim, Youn J. Kim