Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Transfer Research
Facteur d'impact: 0.404 Facteur d'impact sur 5 ans: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561

Volumes:
Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v41.i8.70
pages 889-900

Experimental Study of Heat Transfer from Impinging Jet with Upstream and Downstream Crossflow

Daniel Thibault
Laboratoire d'Etudes Thermiques - UMR CNRS 6608 ENSMA - University of Poitiers, BP 40109 - 86961 Chasseneuil Cedex France
Matthieu Fenot
Institut Pprime, Departement Fluides, Thermique et Combustion. Laboratoire d'Etudes Thermiques - UMR CNRS 6608 ENSMA - University of Poitiers, BP 40109 - 86961 Chasseneuil Cedex France
Gildas Lalizel
Institut Pprime, Departement Fluides, Thermique et Combustion. Laboratoire d'Etudes Thermiques - UMR CNRS 6608 ENSMA - University of Poitiers, BP 40109 - 86961 Chasseneuil Cedex France
Eva Dorignac
Institut Pprime, Departement Fluides, Thermique et Combustion. Axe COST. ENSMA - Universite de Poitiers - BP 40109. 1, avenue Clement ADER. 86961 Futuroscope CHASSENEUIL cedex

RÉSUMÉ

Numerous geometrical and flow parameters can affect the heat transfer in the impinging jet cooling methods. In this study, a configuration close to a real case of vane cooling was adopted. It consists of a main crossflow flowing into an injection hole of diameter D perpendicular to the main flow through a thin plate of thickness t equal to D and the Reynolds number of the injection is fixed to 23,000. A secondary crossflow with a Reynolds number of 1000 is fixed between the exit of the jet and the impingement region, to simulate the flow stream evacuation from the leading edge to the trailing edge of the vane. This geometry is very different from a jet issued from a long pipe as described in many previous studies. The flow field of the jet in the present case has a three-dimensional behavior due to its complex geometry. High levels of turbulence at the exit of the nozzle are observed with Particle Image Velocimetry measurements. The fields of the reference temperature and convective heat transfer coefficient on the impingement surface are calculated from infrared thermography measurements. The results show a significant drop of the heat transfer in such geometry.


Articles with similar content:

EXPERIMENTAL STUDY OF HEAT TRANSFER FROM IMPINGING JET WITH UPSTREAM AND DOWNSTREAM CROSSFLOW
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Eva Dorignac, Daniel Thibault, Matthieu Fenot, Gildas Lalizel
FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS OF A SWIRL JET IMPINGING ON A FLAT PLATE
International Heat Transfer Conference 13, Vol.0, 2006, issue
Juliana Kuhlmann Abrantes, Luis Fernando A. Azevedo
Effect of nozzle geometry on mixing in turbulent free orifice jets
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
T. Epp, M. Koupriyanov, Y. Y. Afriyie, S.S. Aleyasin, Mark F. Tachie
Turbulent characteristics of surface attaching jet influenced by nozzle geometry
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
M. S. Rahman, Mark F. Tachie
Impinging Jet Passive Control for Wall Shear Stress Enhancement
International Heat Transfer Conference 15, Vol.58, 2014, issue
Kodjovi Sodjavi, B. Montagne, Magdalena Kristiawan, Ilinca Nastase, Amina Meslem, Florin Bode