Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Journal of Porous Media
Facteur d'impact: 1.49 Facteur d'impact sur 5 ans: 1.159 SJR: 0.504 SNIP: 0.671 CiteScore™: 1.58

ISSN Imprimer: 1091-028X
ISSN En ligne: 1934-0508

Volumes:
Volume 22, 2019 Volume 21, 2018 Volume 20, 2017 Volume 19, 2016 Volume 18, 2015 Volume 17, 2014 Volume 16, 2013 Volume 15, 2012 Volume 14, 2011 Volume 13, 2010 Volume 12, 2009 Volume 11, 2008 Volume 10, 2007 Volume 9, 2006 Volume 8, 2005 Volume 7, 2004 Volume 6, 2003 Volume 5, 2002 Volume 4, 2001 Volume 3, 2000 Volume 2, 1999 Volume 1, 1998

Journal of Porous Media

DOI: 10.1615/JPorMedia.v12.i4.80
pages 379-386

Mathematical Modeling to Estimate the Critical Oil Flow Rate for Sand Production Onset in the Mansouri Oil Field with a Stabilized Finite Element Method

A. Kohandel Shirazi
Department of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran
Dariush Mowla
Department of Chemical Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz 71345
Feridun Esmaeilzadeh
Department of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran

RÉSUMÉ

In this article, a mathematical model is presented for the calculation of a critical oil production rate to prevent sand production in sandstone reservoirs. For this propose, the reservoir is modeled based on a fully coupled reservoir-geomechanic equation with the elastic behavior assumption for reservoir formation. The proposed model will result in a set of equations that extend into two dimensions. A stabilized finite element method is used to solve the proposed model, resulting in the pressure, displacement, normal, and shear stress profiles around the well in the reservoir. The Mohr-Coulomb criterion is applied to analyze the failure phenomenon and critical oil flow rate estimation. The model is applied to the Mansouri oil field in Ahvaz using the real available field data. The results are in good agreement with the operating field data. Moreover, the effect of different parameters, such as permeability and cohesive strength, on the failure function was investigated.


Articles with similar content:

STUDY ON PHYSICAL SIMULATION EXPERIMENT AND APPLICATION OF CYCLIC WATER INJECTION USING TIGHT LARGE-SCALE MODEL
Special Topics & Reviews in Porous Media: An International Journal, Vol.9, 2018, issue 1
Guozhong Liu , Xiangyang Wang, Zhengming Yang, Yonghua Sun, Xuewei Liu
Influence of Viscosity of the Processed Medium on the Dynamic Characteristics of a Rotary-Pulsed Device
Heat Transfer Research, Vol.36, 2005, issue 5
Yu. S. Kravchenko, I. A. Pirozhenko, B. V. Davydenko, B. I. Basok
PERFORMANCE ANALYSIS MODEL FOR MULTISTAGE FRACTURING HORIZONTAL WELL IN SHALE GAS RESERVOIR BASED ON COUPLED MECHANISMS
Journal of Porous Media, Vol.19, 2016, issue 7
Ya Deng, Mingjin Liu, Zhongyuan Tian, Rongrong Jin, Xiaowei Sun, Rui Guo, Cong Xiao
IMMISCIBLE DISPLACEMENT OF VISCOPLASTIC WAXY CRUDE OILS: A NUMERICAL STUDY
Journal of Porous Media, Vol.20, 2017, issue 5
Kayvan Sadeghy, Mehrdad Raisee, Ali Salehi-Shabestari
SEMI-ANALYTICAL SOLUTION FOR TRANSIENT INFLOW PERFORMANCE RELATIONSHIP OF MULTIPLE-FRACTURE HORIZONTAL WELLS (MFHWS) IN TIGHT OIL RESERVOIRS
Special Topics & Reviews in Porous Media: An International Journal, Vol.10, 2019, issue 3
Chunsen Zhao, Hongjun Yin, Xingke Li, Huiying Zhong, Yikun Liu, Ermeng Zhao, Cuiqiao Xing