Abonnement à la biblothèque: Guest

DEVELOPMENT OF PREMIXED BURNER BASED ON STABILIZED COMBUSTION WITHIN DISCRETE POROUS MEDIUM

Volume 14, Numéro 10, 2011, pp. 909-917
DOI: 10.1615/JPorMedia.v14.i10.60
Get accessGet access

RÉSUMÉ

Though extensive research has been carried out on porous media combustion (PMC), more attention is needed to explore the feasibility of this promising technology for practical applications. In the present study an attempt is made to develop an eco-friendly and compact, premixed liquified petroleum gas (LPG) burner based on matrix-stabilized combustion in porous medium (PM). The premixing mechanism is the combination of a swirler and steel wire-mesh packing. The preheating zone is made up of ceramic (porcelain) foam and the reaction zone is a packed bed of solid (Al2O3) spheres. The experiments are conducted with different layers and sizes (10, 20, and 30 mm) of alumina balls. Transient and steady temperature distributions and emissions (NO, CO, and SO2) are measured in each case for a constant equivalence ratio. It is found that the combination of porcelain foam (preheat layer) and one reaction layer made of 30-mm-size balls gives the best performance. It is observed that the proposed burner (PMB) can yield a 60% saving in fuel and 76% NOx reduction, compared to the conventional burner (CB). The CO and SO2 emissions are also well within the global standards. The thermal efficiencies of the PMB and CB are also estimated by proper experiments. For a fuel input of 0.4 Lpm (liters per minute) the thermal efficiency of the PMB is found to be 56% whereas for the CB, it is 46% at a fuel input of 0.5 Lpm.

CITÉ PAR
  1. Ismail Ahmad Kamal, Abdullah Mohd Zulkifly, Zubair Mohammed, Ahmad Zainal Arifin, Jamaludin Abdul Rashid, Mustafa Khairil Faizi, Abdullah Mohamad Nazir, Application of porous medium burner with micro cogeneration system, Energy, 50, 2013. Crossref

  2. Janvekar Ayub Ahmed, Miskam M.A., Abas Aizat, Ahmad Zainal Arifin, Juntakan T., Abdullah M.Z., Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of micro burner, Energy, 122, 2017. Crossref

  3. Janvekar Ayub Ahmed, Abdullah M. Z., Ahmad Z. A., Abas Aizat, Hussien Ahmed A., Bashir Musavir, Azam Qummare, Assessment of porous media burner for surface/submerged flame during porous media combustion, 1818, 2017. Crossref

  4. Ismail A. K., Ibrahim N.H., Shamsuddin K. A., Abdullah M.Z., Zubair M., A practical approach in porous medium combustion for domestic application: A review, IOP Conference Series: Materials Science and Engineering, 370, 2018. Crossref

  5. Janvekar Ayub Ahmed, Abdullah M Z, Ahmad Z A, Abas A, Ismail A K, Hussien A A, Kataraki P S, Ishak M H H, Mazlan M, Zubair A F, Experiential study on temperature and emission performance of micro burner during porous media combustion, IOP Conference Series: Materials Science and Engineering, 370, 2018. Crossref

  6. Dash Kishan, Samantaray Sikata, A review of the effects of burner configuration and operating parameters on the performance of porous radiant burner, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MANUFACTURING ENGINEERING RESEARCH 2021: ICRAMER 2021, 2460, 2022. Crossref

Prochains articles

Effects of Momentum Slip and Convective Boundary Condition on a Forced Convection in a Channel Filled with Bidisperse Porous Medium (BDPM) Vanengmawia PC, Surender Ontela ON THERMAL CONVECTION IN ROTATING CASSON NANOFLUID PERMEATED WITH SUSPENDED PARTICLES IN A DARCY-BRINKMAN POROUS MEDIUM Pushap Sharma, Deepak Bains, G. C. Rana Effect of Microstructures on Mass Transfer inside a Hierarchically-structured Porous Catalyst Masood Moghaddam, Abbas Abbassi, Jafar Ghazanfarian Insight into the impact of melting heat transfer and MHD on stagnation point flow of tangent hyperbolic fluid over a porous rotating disk Priya Bartwal, Himanshu Upreti, Alok Kumar Pandey Numerical Simulation of 3D Darcy-Forchheimer Hybrid Nanofluid Flow with Heat Source/Sink and Partial Slip Effect across a Spinning Disc Bilal Ali, Sidra Jubair, Md Irfanul Haque Siddiqui Fractal model of solid-liquid two-phase thermal transport characteristics in the rough fracture network shanshan yang, Qiong Sheng, Mingqing Zou, Mengying Wang, Ruike Cui, Shuaiyin Chen, Qian Zheng Application of Artificial Neural Network for Modeling of Motile Microorganism-Enhanced MHD Tangent Hyperbolic Nanofluid across a vertical Slender Stretching Surface Bilal Ali, Shengjun Liu, Hongjuan Liu Estimating the Spreading Rates of Hazardous Materials on Unmodified Cellulose Filter Paper: Implications on Risk Assessment of Transporting Hazardous Materials Heshani Manaweera Wickramage, Pan Lu, Peter Oduor, Jianbang Du ELASTIC INTERACTIONS BETWEEN EQUILIBRIUM PORES/HOLES IN POROUS MEDIA UNDER REMOTE STRESS Kostas Davanas Gravity modulation and its impact on weakly nonlinear bio-thermal convection in a porous layer under rotation: a Ginzburg-Landau model approach Michael Kopp, Vladimir Yanovsky Pore structure and permeability behavior of porous media under in-situ stress and pore pressure: Discrete element method simulation on digital core Jun Yao, Chunqi Wang, Xiaoyu Wang, Zhaoqin Huang, Fugui Liu, Quan Xu, Yongfei Yang Influence of Lorentz forces on forced convection of Nanofluid in a porous lid driven enclosure Yi Man, Mostafa Barzegar Gerdroodbary SUTTERBY NANOFLUID FLOW WITH MICROORGANISMS AROUND A CURVED EXPANDING SURFACE THROUGH A POROUS MEDIUM: THERMAL DIFFUSION AND DIFFUSION THERMO IMPACTS galal Moatimid, Mona Mohamed, Khaled Elagamy CHARACTERISTICS OF FLOW REGIMES IN SPIRAL PACKED BEDS WITH SPHERES Mustafa Yasin Gökaslan, Mustafa Özdemir, Lütfullah Kuddusi Numerical study of the influence of magnetic field and throughflow on the onset of thermo-bio-convection in a Forchheimer‑extended Darcy-Brinkman porous nanofluid layer containing gyrotactic microorganisms Arpan Garg, Y.D. Sharma, Subit K. Jain, Sanjalee Maheshwari A nanofluid couple stress flow due to porous stretching and shrinking sheet with heat transfer A. B. Vishalakshi, U.S. Mahabaleshwar, V. Anitha, Dia Zeidan ROTATING WAVY CYLINDER ON BIOCONVECTION FLOW OF NANOENCAPSULATED PHASE CHANGE MATERIALS IN A FINNED CIRCULAR CYLINDER Noura Alsedais, Sang-Wook Lee, Abdelraheem Aly Porosity Impacts on MHD Casson Fluid past a Shrinking Cylinder with Suction Annuri Shobha, Murugan Mageswari, Aisha M. Alqahtani, Asokan Arulmozhi, Manyala Gangadhar Rao, Sudar Mozhi K, Ilyas Khan CREEPING FLOW OF COUPLE STRESS FLUID OVER A SPHERICAL FIELD ON A SATURATED BIPOROUS MEDIUM Shyamala Sakthivel , Pankaj Shukla, Selvi Ramasamy
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections Prix et politiques d'abonnement Begell House Contactez-nous Language English 中文 Русский Português German French Spain