Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Pipe Science and Technology, An International Journal

ISSN Imprimer: 2151-7975
ISSN En ligne: 2151-7991

Archives: Volume 1, 2010 to Volume 8, 2017

Heat Pipe Science and Technology, An International Journal

DOI: 10.1615/HeatPipeScieTech.v6.i3-4.50
pages 167-182

COPPER−WATER LOOP HEAT PIPES: ISSUES AND ACHIEVEMENTS

Yury F. Maydanik
Institute of Thermal Physics, Ural Branch of the Russian Academy of Sciences, 107a Amundsen Str., Yekaterinburg, 620016, Russia
Vladimir G. Pastukhov
Institute of Thermal Physics, Ural Branch of the Russian Academy of Sciences, 107a Amundsen Str., Yekaterinburg, 620016, Russia

RÉSUMÉ

Copper−water loop heat pipes (LHPs) are promising devices for providing an effective thermal link between a heat source and a heat sink in cooling systems of powerful objects having relatively small dimensions and operating in the temperature range from 50 to 100°C. The thermo-physical properties of water as a working fluid and the high thermal conductivity of copper as a constructional material for a body and a wick as well as their good compatibility make it possible to achieve an extremely high heat flux and low thermal resistance of such LHPs. Today the obtained values of these parameters are close to 900 W/cm2 and 0.04°C/W, respectively. However, making copper−water LHPs, one has to overcome a serious contradiction between the high thermal conductivity of copper and the low value of dP /dT which water has at a temperature below 100°C. Computer simulations and experimental investigations of copper−water LHPs have shown that despite the mentioned contradiction, achievement of high performance characteristics is possible with optimal choice of the design parameters of devices. The paper presents results of development, experimental and numerical investigations of LHPs made entirely of copper and equipped with a cylindrical and a flat evaporator with water as a working fluid. Examples of the use of the given devices in cooling systems of different electronics are shown given.


Articles with similar content:

An Experimental Analysis of an Open Looped Pulsating Heat Pipe Operating with a Dielectric Working Fluid for Embedded Power Electronic Applications
International Heat Transfer Conference 15, Vol.49, 2014, issue
Daniel Kearney, Justin Griffin, Omar Suleman
A STUDY OF HEAT TRANSFER IN HEAT PIPE EVAPORATORS WITH METAL FIBER CAPILLARY STRUCTURES
Journal of Enhanced Heat Transfer, Vol.19, 2012, issue 1
Andrey A. Shapoval, J.C. Legros, M. J. Lalor, O. Mgaloblishvili, Anatoliy G. Kostornov
NEW TYPE OF EVAPORATOR FOR LOOP HEAT PIPE
Second Thermal and Fluids Engineering Conference, Vol.20, 2017, issue
Alexander Yakomaskin
STRUCTURAL, THERMOPHYSICAL, AND MECHANICAL CHARACTERISTICS OF METAL FELT WICKS OF MODERN HEAT PIPES
Heat Pipe Science and Technology, An International Journal, Vol.6, 2015, issue 1-2
V. Zaripov, Volodymyr Baturkin, A. Gershuni
DEVELOPMENT OF LOOP HEAT PIPES WITH A DISK-SHAPED EVAPORATOR
International Heat Transfer Conference 16, Vol.13, 2018, issue
Zhichun Liu, Wei Liu, Song He