Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Journal of Enhanced Heat Transfer
Facteur d'impact: 1.406 Facteur d'impact sur 5 ans: 1.075 SJR: 0.287 SNIP: 0.653 CiteScore™: 1.2

ISSN Imprimer: 1065-5131
ISSN En ligne: 1563-5074

Volumes:
Volume 27, 2020 Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.v10.i3.40
pages 287-300

The Effects of Gap Position in Discrete Ribs on Local Heat/Mass Transfer in a Square Duct

Hyung-Hee Cho
School of Mechanical Engineering, Yonsei University, Seoul 120 749, South Korea
Y. Y. Kim
Department of Mechanical Engineering, Yonsei University, Seoul 120-749, Korea
Dong-Ho Rhee
Korea Aerospace Research Institute Daejeon, 305-333, Korea
Sei Young Lee
Department of Mechanical Engineering, Yonsei University, Seoul 120-749, Korea
S. J. Wu
Department of Mechanical Engineering, Yonsei University, Seoul 120-749, Korea
C. K. Choi
Department of Mechanical Engineering, Seoul National University, Seoul 120-749, Korea

RÉSUMÉ

Local heat/mass transfer measurements are conducted to investigate the effects of rib arrangements and gap positions on the discrete rib. The combined effects of the gap flows of the discrete ribs and secondary flows are examined in order to promote uniformity of heat/mass transfer distributions, as well as to augment heat/mass transfer. A square channel with rectangular ribs is used for the stationary duct test. The rib-to-rib pitch to the rib height ratio is 8, and the rib attack angle is 60°. The gap width is the same as the rib width, and two gap positions, which are upstream and downstream gaps, are examined with parallel and cross rib arrangements. A naphthalene sublimation method is used to measure local heat/mass transfer coefficients. With the angled discrete ribs, the heat transfer on the surface is enhanced and the uniformity of the heat transfer coefficients is promoted because the gap flow promotes local turbulence and flow mixing near the ribbed surface, while the rib-induced secondary flow is maintained in a duct. The discrete rib arrangements with downstream gaps show better cooling performance than continuous rib or discrete rib arrangements with upstream gaps.


Articles with similar content:

Local heat/mass transfer characteristics in a square duct with various rib arrangements
International Heat Transfer Conference 12, Vol.47, 2002, issue
Y. Y. Kim, Chung Choi, Dong Ho Rhee, Sei Young Lee, Hyung-Hee Cho, S. J. Wu
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
M. Papa, V. Srinivasan, Fabio Gori, Richard J. Goldstein
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Heat Transfer Research, Vol.41, 2010, issue 6
M. Papa, V. Srinivasan, Fabio Gori, Richard J. Goldstein
EFFECTS OF GAPS BETWEEN THE SIDE-WALLS AND RIBS ON THE RIB-INDUCED FLOW STRUCTURE AND HEAT TRANSFER DISTRIBUTION INSIDE A HIGH ASPECT RATIO COOLING CHANNEL
Journal of Flow Visualization and Image Processing, Vol.9, 2002, issue 2&3
Akira Murata, Robert Kiml, Sadanari Mochizuki
NUMERICAL STUDY ON FLOW AND HEAT TRANSFER IN A RECTANGULAR CHANNEL WITH 45 DEG RIB TURBULATORS AND BLEED HOLES
Journal of Enhanced Heat Transfer, Vol.19, 2012, issue 5
Ya Jun Song, Zhong Yang Shen, Yong Hui Xie, Di Zhang