Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Journal of Enhanced Heat Transfer
Facteur d'impact: 1.406 Facteur d'impact sur 5 ans: 1.075 SJR: 0.287 SNIP: 0.653 CiteScore™: 1.2

ISSN Imprimer: 1065-5131
ISSN En ligne: 1026-5511

Volumes:
Volume 27, 2020 Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.2012004285
pages 397-408

EXPERIMENTAL STUDY AND OPTIMIZATION OF AIR ATOMIZED SPRAY WITH SURFACTANT ADDED WATER TO PRODUCE HIGH COOLING RATE

Soumya S. Mohapatra
Department of Chemical Engineering, Indian Institute of Technology Kharagpur, Kharagpur - 721302, India
Satya V. Ravikumar
Department of Chemical Engineering, Indian Institute of Technology Kharagpur, Kharagpur - 721302, India
Sachin Andhare
Department of Chemical Engineering, Indian Institute of Technology Kharagpur, Kharagpur - 721302, India
Sudipto Chakraborty
Department of Chemical Engineering, Indian Institute of Technology Kharagpur, Kharagpur - 721302, India
Surjya K. Pal
Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur - 721302, India

RÉSUMÉ

The current research deals with the heat transfer study using air atomized spray with surfactant added water for cooling a hot steel plate (6 mm thick) at high initial surface temperature (~900°C). Experiments were conducted with an air atomized spray at a fixed nozzle-to-plate distance and at different impingement density, air flow rate, and surfactant concentration. An inverse heat conduction model has been developed for the estimation of surface heat flux and surface temperature from the experimentally recorded temperature profile. From the experimental data, response surface methodology (RSM) has been used to derive statistical correlations for cooling rate and surface heat flux. Analysis shows that the predicted values obtained from the statistical model are in close agreement with the experimental data. In addition to the above, the interaction behavior and the optimal values of different process variables (impingement density, air flow rate, and surfactant concentration) are also determined. The achieved cooling rate and the developed correlations can be useful in the steel industry to produce high strength steel.


Articles with similar content:

AN EXPERIMENTAL INVESTIGATION OF REWETTING OF HOT HORIZONTAL SURFACE BY BOTTOM JET IMPINGEMENT
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Shubham K. Mishra, Avadhesh Kumar Sharma, Mayank Modak, Santosh K. Sahu
BOILING AND WETTING PHENOMENA OF HOT SURFACE DURING JET IMPINGEMENT QUENCHING
International Heat Transfer Conference 13, Vol.0, 2006, issue
Yuichi Mitsutake, Masanori Monde, P. L. Woodfield, A. K. Mozumder
A parametric study on spread and heat transfer characteristics of two consecutively impinging droplets over a hot surface
Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Vol.0, 2019, issue
Ganesh Guggilla, Arvind Pattamatta, Ramesh Narayanaswamy
Comparative heat transfer study of MWCNT and CuO water nanofluids with single circular jet impingement on copper plate
Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Vol.0, 2019, issue
Nagendra M.N. S, Pramit G. Yeole, Surendra D. Barewar, Sandesh S. Chougule
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE JET-TO-JET SPACING BETWEEN TWO ADJACENT AIR JETS IMPINGING A FLAT PLATE
4th Thermal and Fluids Engineering Conference, Vol.28, 2019, issue
Flavia V. Barbosa, José C. F. Teixeira, Senhorinha F. C. F. Teixeira