Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Journal of Enhanced Heat Transfer
Facteur d'impact: 0.562 Facteur d'impact sur 5 ans: 0.605 SJR: 0.211 SNIP: 0.361 CiteScore™: 0.33

ISSN Imprimer: 1065-5131
ISSN En ligne: 1026-5511

Volumes:
Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.v10.i4.70
pages 431-444

Effects of Rib Height on Heat Transfer Performance Inside a High Aspect Ratio Channel with Inclined Ribs

Robert Kiml
Tokyo University of Agriculture and Technology, Department of Mechanical Systems Engineering, Koganei-shi,Nakacho 2-24-16,Tokyo 184-8588, Japan
Sadanari Mochizuki
Tokyo University of Agriculture and Technology, 2-24-16, Naka-cho, Koganei-shi, Tokyo 184, JAPAN
Akira Murata
Department of Mechanical Systems Engineering, Tokyo University of Agriculture and Technology, 2-24-16 Nakacho, Koganei, Tokyo 184-8588, Japan

RÉSUMÉ

Heat transfer and pressure drop experiments were performed in a rectangular high aspect ratio channel (5:1, 45 ґ 9 mm) representing a turbine blade trailing edge cooling passage. The oblique ribs were attached to two opposing long side walls and were intended to function as secondary flow inducers as well as turbulators to improve the heat transfer of the both rib-roughened and rear (one of the short side walls) walls. The experiments were performed for three rib heights—h = 3 mm, h = 2 mm, and h = 1 mm (h-rib height)—for two rib arrangements, transverse (90°) and inclined (60°). It was verified that (1) the heat transfer enhancement on the rear wall was attributed to the rib-induced secondary flow, which carries the cold air from the passage core region toward the rear wall and enhances the heat transfer appreciably; and (2) heat transfer and pressure drop strongly deteriorate with a decreasing rib height because of the weakening of the rib-induced positive effects as a turbulence promoter and secondary flow inducer.


Articles with similar content:

HEAT TRANSFER ENHANCEMENT MECHANISM IN A RECTANGULAR PASSAGE WITH V- AND L-SHAPED RIBS
Journal of Flow Visualization and Image Processing, Vol.8, 2001, issue 1
Akira Murata, Robert Kiml, Sadanari Mochizuki
EFFECTS OF GAPS BETWEEN THE SIDE-WALLS AND RIBS ON THE RIB-INDUCED FLOW STRUCTURE AND HEAT TRANSFER DISTRIBUTION INSIDE A HIGH ASPECT RATIO COOLING CHANNEL
Journal of Flow Visualization and Image Processing, Vol.9, 2002, issue 2&3
Akira Murata, Robert Kiml, Sadanari Mochizuki
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
M. Papa, V. Srinivasan, Fabio Gori, Richard J. Goldstein
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Heat Transfer Research, Vol.41, 2010, issue 6
M. Papa, V. Srinivasan, Fabio Gori, Richard J. Goldstein
The Effects of Gap Position in Discrete Ribs on Local Heat/Mass Transfer in a Square Duct
Journal of Enhanced Heat Transfer, Vol.10, 2003, issue 3
Y. Y. Kim, C. K. Choi, Sei Young Lee, Hyung-Hee Cho, Dong-Ho Rhee, S. J. Wu