Journal of Enhanced Heat Transfer
Publication de 8 numéros par an
ISSN Imprimer: 1065-5131
ISSN En ligne: 1563-5074
IF:
2.3
5-Year IF:
1.8
Immediacy Index:
0.2
Eigenfactor:
0.00037
JCI:
0.6
SJR:
0.433
SNIP:
0.593
CiteScore™::
4.3
H-Index:
35
Indexed in
Volume 11, 2004 Numéro 2
DOI: 10.1615/JEnhHeatTransf.v11.i2
Enhanced Heat and Mass Transfer in the New Millennium: A Review of the 2001 Literature
pp. 87-118
DOI: 10.1615/JEnhHeatTransf.v11.i2.10
Bionic Optimization of Heat Transport Paths for Heat Conduction Problems
pp. 119-132
DOI: 10.1615/JEnhHeatTransf.v11.i2.20
Effects of Surface Coating on the Critical Heat Flux for Pool Boiling from a Downward Facing Surface
pp. 133-150
DOI: 10.1615/JEnhHeatTransf.v11.i2.30
Using Capsulated Liquid Metal Fins for Heat Transfer Enhancement
pp. 151-160
DOI: 10.1615/JEnhHeatTransf.v11.i2.40
Condensation Heat Transfer and Pressure Drop of Brazed Plate Heat Exchangers Using Refrigerant R-134a
pp. 161-182
DOI: 10.1615/JEnhHeatTransf.v11.i2.50
Dernier numéro
EXPERIMENTAL AND THEORETICAL CHARACTERIZATION OF TWO-PHASE FLOW DISTRIBUTION IN UNBALANCED FLOW NETWORKS
FIELD EXPERIMENTAL INVESTIGATION OF THE INSULATION DETERIORATION CHARACTERISTICS OF OVERHEAD PIPELINE FOR STEAM HEATING NETWORK
FLOW AND HEAT-TRANSFER CHARACTERISTICS IN SMALL-DIAMETER TUBE BUNDLES WITH A STAGGERED LAYOUT: AN EXPERIMENTAL STUDY
POOL BOILING HEAT TRANSFER CHARACTERISTICS OF POROUS NICKEL MICROSTRUCTURE SURFACES
Prochains articles
Enhancement Evaluation Criteria for Pool Boiling Enhancement Structures in Electronics Cooling: CHF Enhancement Ratio (ER-CHF) and Enhancement Index (EI)
Influence of transient heat pulse on heat transfer performance of vapor chamber with different filling ratios
Effect of Geometrical Parameters on the Thermal-Hydraulic Performance of Internal Helically Ribbed Tubes
Condensation heat transfer in smooth and three-dimensional dimpled tubes of various materials
In Memoriam of Professor Ralph L. Webb on the anniversary of his 90th birthday
Analysis of the Single-Blow Transient Testing Technique for Non-metallic Heat Exchangers
Evaluation of Heat Transfer Rate of Double-Layered Heat Sink Cooling System with High Energy Dissipation
Experimental Investigation on Behavior of a Diesel Engine with Energy, Exergy, and Sustainability Analysis Using Titanium Oxide (Tio2) Blended Diesel and Biodiesel
COLLISION MORPHOLOGIES OF SUPERCOOLED WATER DROPLETS ON SMALL LOW-TEMPERATURE SUPERHYDROPHOBIC SPHERICAL TARGETS
Pool boiling heat transfer characteristics of porous nickel microstructure surfaces
Field experimental investigation of the insulation deterioration characteristics of overhead pipeline for steam heating network
A parametric and comparative study on bare-tube banks and new-cam-shaped tube banks for waste heat recovery applications