Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Journal of Enhanced Heat Transfer
Facteur d'impact: 0.562 Facteur d'impact sur 5 ans: 0.605 SJR: 0.211 SNIP: 0.361 CiteScore™: 0.33

ISSN Imprimer: 1065-5131
ISSN En ligne: 1026-5511

Volumes:
Volume 26, 2019 Volume 25, 2018 Volume 24, 2017 Volume 23, 2016 Volume 22, 2015 Volume 21, 2014 Volume 20, 2013 Volume 19, 2012 Volume 18, 2011 Volume 17, 2010 Volume 16, 2009 Volume 15, 2008 Volume 14, 2007 Volume 13, 2006 Volume 12, 2005 Volume 11, 2004 Volume 10, 2003 Volume 9, 2002 Volume 8, 2001 Volume 7, 2000 Volume 6, 1999 Volume 5, 1998 Volume 4, 1997 Volume 3, 1996 Volume 2, 1995 Volume 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.v24.i1-6.40
pages 63-84

EXPERIMENTAL RESULTS OF FLOW CONDENSATION IN SMOOTH AND MICRO-FIN TUBES WITH HCFC-22, HFC-134A AND HFC-410A REFRIGERANTS

Liangyou Tang
Outokumpu Copper Franklin, Inc., 4720 Bowling Green Road, Franklin, KY 42134
Michael M. Ohadi
Small and Smart Thermal Systems Laboratory, Center for Energy Environmental Engineering, Department of Mechanical Engineering, University of Maryland, College Park, Maryland 20742, USA
Arthur T. Johnson
Department of Biological Resources Engineering, University of Maryland, College Park, MD 20742

RÉSUMÉ

A study of single-phase convection and flow condensation heat transfer in horizontal copper tubes (8.81 mm inside diameter) was conducted using three refrigerants (HCFC-22, HFC-134a and HFC-410A). A smooth tube and three micro-fin tubes (axial, helical and Crosshatch enhancement) were examined. Local-mean flow condensation data were experimentally obtained. Experimental conditions were selected to reflect typical operating conditions encountered in refrigeration and air-conditioning applications. All micro-fin tubes illustrated significant enhancement in single-phase convection and flow condensation. The cross-hatch enhancement performed particularly better in both single-phase convection and flow condensation. For the three refrigerants investigated, the refrigerant type seemed to have little influence on the enhancement mechanism of the micro-fin tubes examined. The experimental results are presented in Part I. Development of design equations is presented in Part II.


Articles with similar content:

Flow Condensation in Smooth and Micro-fin Tubes with HCFC-22, HFC-134a and HFC-410A Refrigerants. Part I: Experimental Results
Journal of Enhanced Heat Transfer, Vol.7, 2000, issue 5
Michael M. Ohadi, Liangyou Tang, Arthur T. Johnson
DESIGN EQUATIONS OF FLOW CONDENSATION IN SMOOTH AND MICRO-FIN TUBES WITH HCFC-22, HFC-134A AND HFC-410 REFRIGERANTS
Journal of Enhanced Heat Transfer, Vol.24, 2017, issue 1-6
Michael M. Ohadi, Liangyou Tang, Arthur T. Johnson
Flow Condensation in Smooth and Micro-fin Tubes with HCFC-22, HFC-134a and HFC-410 Refrigerants. Part II: Design Equations
Journal of Enhanced Heat Transfer, Vol.7, 2000, issue 5
Michael M. Ohadi, Liangyou Tang, Arthur T. Johnson
HEAT TRANSFER IN VESSELS AGITATED WITH PROPELLER
International Heat Transfer Conference 8, Vol.6, 1986, issue
T. Cakaloz, S. Ulku
On the Use of Wire-Coil Inserts to Augment Tube Heat Transfer
Journal of Enhanced Heat Transfer, Vol.16, 2009, issue 1
Stephen D. Heister, Neal R. Herring