Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Journal of Flow Visualization and Image Processing
SJR: 0.161 SNIP: 0.312 CiteScore™: 0.1

ISSN Imprimer: 1065-3090
ISSN En ligne: 1940-4336

Journal of Flow Visualization and Image Processing

DOI: 10.1615/JFlowVisImageProc.2018027766
pages 229-244

OPTICAL VISUALIZATION AND MEASUREMENT OF LIQUID JET CORE IN A COAXIAL ATOMIZER WITH ANNULAR SWIRLING AIR

Abhijeet Kumar
Thermodynamics and Combustion Engines Lab, I.I.T. Madras, Chennai, Tamil Nadu, 600036, India
Srikrishna Sahu
Thermodynamics and Combustion Lab, Department of Mechnaical Engineering, Indian Institute of Technology, Madras, 600036, India

RÉSUMÉ

This paper reports application of the optical connectivity (OC) technique for visualization and measurement of primary liquid jet core in a coaxial air-blast atomizer with annular swirling air flow. Experiments were conducted for various injector operating flow conditions corresponding to Weber number (Weg) and air-to-liquid momentum flux ratio (M) in the range 80–300 and 1–8, respectively. The air swirl number, S, was varied in the range 0–0.8 using different air swirlers within the atomizer. The image processing methods for characterization of jet breakup length and jet instabilities were described in detail. Visualization of the instantaneous images of the jet core captured by the OC technique in the absence and presence of air swirl were presented. Both mean and fluctuations of liquid jet breakup lengths were calculated. An experimental correlation was obtained for mean breakup length, which was found to bear a nonlinear inverse relation with both M and S. The air swirl was found to increase the fluctuations of jet breakup length signifying higher unsteadiness in the jet breakup process. Preliminary results on characterization of jet instabilities based on identification of liquid–air interface location on either side of the injector axis on the OC images were presented. The differences due to the effect of air swirl on jet instabilities close to the injector exit and near the mean jet breakup point were discussed.


Articles with similar content:

BREAKUP DYNAMICS AND NEAR NOZZLE SPRAY FLUCTUATIONS IN A TWIN-JET CROSS-FLOW AIRBLAST ATOMIZER
Atomization and Sprays, Vol.29, 2019, issue 3
Srikrishna Sahu, Shirin Patil
DEVELOPMENT OF INTERNAL-MIXING TWIN-FLUID ATOMIZER WITH MULTIPLE EXIT PORTS FOR HEAVY OIL-FIRED BOILERS
Atomization and Sprays, Vol.29, 2019, issue 2
Kazuaki Hashiguchi, K. Nishida, K. Sato, F. Yamane, H. Fujii
SPRAY BREAKUP MECHANISM FROM THE HOLE-TYPE NOZZLE AND ITS APPLICATIONS
Atomization and Sprays, Vol.10, 2000, issue 3-5
Hiroyuki Hiroyasu
DISINTEGRATION OF LIQUID JETS FROM A COAXIAL DUAL NOZZLE, PART I: OBSERVATION OF BREAKUP PHENOMENA
Atomization and Sprays, Vol.7, 1997, issue 5
Soo-Young No, Masataka Arai, Kenji Amagai
COLUMN THICKNESS VARIATION OF 100-µm LIQUID JETS IN STILL AIR
Atomization and Sprays, Vol.27, 2017, issue 1
Jaiho Lee, Khaled A. Sallam