Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimer: 1093-3611
ISSN En ligne: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v10.i3.50
pages 407-418

INFLUENCE OF ARC INSTABILITIES ON THE INJECTION IN SUSPENSION PLASMA SPRAYING

R. Etchart-Salas
PCTS -CNRS UMR 6638, University of Limoges, 123 av. A. Thomas, 87060 Limoges cedex, France
V. Rat
PCTS -CNRS UMR 6638, University of Limoges, 123 av. A. Thomas, 87060 Limoges cedex, France
J. F. Coudert
Laboratoire Sciences des Procédés Céramiques et Traitements de Surface, UMR-CNRS 6638, Université de Limoges, 87060 Limoges Cedex, France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France
G. Lafougere
Lycee Cabanis, Electronics department, 6 boulevard Henri de Jouvenel 19311 Brive-la-Gaillarde Cedex, France

RÉSUMÉ

Recent works have shown that Suspension Plasma Spraying (SPS) allows depositing Yttria Stabilized Zirconia (YSZ) dense coatings for Solid Oxide Fuel Cells provided that the powder size distribution and plasma parameters are carefully adapted. This paper presents a further analysis of important SPS parameters which leads to control the interaction plasma jet-suspension. A particular attention is paid to the treatment of liquid materials mechanically injected (suspension jet or drops) according to different working parameters such as the plasma mixture and the injection pressure. Concerning the suspension injection, by observing the suspension drops injection with a fast shutter camera triggered by a defined voltage level of the plasma torch, it is shown that plasma jet fluctuations have a strong influence on drops fragmentation.


Articles with similar content:

INFLUENCE OF POWDER SIZE DISTRIBUTIONS ON MICROSTRUCTURAL FEATURES OF FINELY STRUCTURED PLASMA SPRAYED COATINGS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.8, 2004, issue 3
J. F. Coudert, J. Fazilleau, C. Delbos, C. Bonhomme, Pierre Fauchais, V. Rat
DIAGNOSTICS AND ON-LINE-CONTROL OF A PLASMA SPRAYING PROCESS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.1, 1997, issue 3
K. D. Landes
EXPERIMENTAL INVESTIGATION OF METAL PARTICLE VAPORIZATION IN PLASMA SPRAYING
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
Michel Vardelle, C. Trassy, K.-I. Li, Pierre Fauchais
DIAGNOSTIC OF FLOW FIELDS OF SILICON PARTICLES IN AN RF PLASMA FOR PURIFICATION TREATMENTS
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
Jacques Amouroux, Daniel Morvan, E. Francke, M. Arnold, I. Cazard-Juvernat, S. Magnaval
PREPARATION OF INSULATING REFRACTORY MATERIALS BY PLASMA SPRAY TECHNOLOGY
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 3
Vitas Valincius, Vilma Snapkauskiene, Viktorija Valinciute, Vladas Mecius, Romualdas Kerzelis