Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.19 SNIP: 0.341 CiteScore™: 0.43

ISSN Imprimer: 1093-3611
ISSN En ligne: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v10.i3.80
pages 445-456

THERMAL STABILITY OF TiAlBN and TiN/TiCN COATINGS

A. Raveh
Division of Chemistry, NRC-Negev, P.O. Box 9001, Beer-Sheva 84190; and Ben-Gurion University, P.O. Box 653, Beer-Sheva 84105, Israel
I. Zukerman
Ben-Gurion University, P.O. Box 653, Beer-Sheva 84105, Israel
R. Z. Shneck
Ben-Gurion University, P.O. Box 653, Beer-Sheva 84105, Israel
R. Avni
Euro-Consultants (Israel), 10 Dov Friedman St. Ramat Gan, Israel
I. Fried
Euro-Consultants (Israel), 10 Dov Friedman St. Ramat Gan, Israel

RÉSUMÉ

Thermal stability of TiAlBN and TiN/TiCN hard coatings was studied by evaluating the stress-temperature curves and the wear resistance after annealing up to 1123 K. The microstructure, phase composition and hardness were studied prior and after annealing.
Prior to annealing, a correlation between the residual stress and hardness was observed. After annealing, the compressive stresses of the TiAlBN coatings decreased from 1.0 GPa to less than 0.2 GPa, while the hardness remained constant or increased from ~10 GPa to ~25 GPa. The hardness increase of the coatings after annealing is related to the self-hardening effect.
The effect of the plasma nitriding mode prior to the deposition of 3 μm thick TiCN or TiN/TiCN coatings on the wear resistance of the duplex-treated coating (nitriding and deposition) was studied. The stability of the wear resistance of the duplex treated-coating was also examined after one hour of annealing at 1123 K. It was found that the plasma-nitrided layer in the duplex treatment maintains the wear resistance stability of the annealed duplex-treated hard coatings.


Articles with similar content:

THERMAL SHOCK BEHAVIOUR OF CORDIERITE CERAMIC FILTER FROM NANOSIZE SEPOLITE
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2011, issue
Esin Gunay, Meryem Sariguzel
CERAMIC COATINGS USING MAGNETO-PLASMA-DYNAMIC ARCJET GENERATORS
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
Yoichi Kagaya, Takao Yoshikawa, Hirokazu Tahara
FORMATION OF HARD AND WEAR-RESISTANT NIOBIUM CARBIDE COATINGS ON HARD-ALLOY TOOLS BY A VACUUM–ARC METHOD
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.23, 2019, issue 2
Andrej K. Kuleshov, V. M. Anishchik, I. A. Sakovich, D. P. Rusalski, Alexander A. Malashevich, Vladimir V. Uglov, V. A. Firago
NANOMODIFIED DISPERSED PARTICLES- AND SYNTHETIC FIBERS-FILLED EPOXY COMPOSITE MATERIALS FOR THE METAL- POLYMER TRIBOSYSTEMS OF TRANSPORT VEHICLES
Nanoscience and Technology: An International Journal, Vol.8, 2017, issue 1
A. V. Buketov, Sergey O. Smetankin, Dmitriy O. Zinchenko
Alumina coatings from aluminium electrodeposited in molten salts
Advances in Molten Salts, Vol.0, 1998, issue
Pr. V. Hasthorpe, Ir. S. Delhaye