Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimer: 1093-3611
ISSN En ligne: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v15.i1.20
pages 7-13

CALCULATION OF RF PLASMA TORCH PARAMETERS BY MEANS OF NON-EQUILIBRIUM MODEL OF AR PLASMA

Sergey V. Dresvin
Laboratory of Electrotechnological and Plasma Installation of Polytechnic Institute -SPb State Polytechnical University, 29 Polytechnicheskaya Str., 195251 Saint-Petersburg, Russia
Nguen Quoc Shi
State Technical University, St Petersburg Russia
D. Ivanov
St. Petersburg State Polytechnic University, 29 Politekhnicheskaya Str., St. Petersburg, 195251, Russia
Jacques Amouroux
Laboratoire de Genie des Precedes Plasmas Universite P. et M. Curie, ENSCP 11 rue P. et M. Curie 75005 Paris France

RÉSUMÉ

Calculation of RF plasma torch parameters was made by means of non-equilibrium model of plasma. In this study it was calculated RF ICP plasma torch by frequency 28 MHz; power 2-4 kW, inner diameter of the torch 24 mm, plasma gas - argon. Plasma torch has three axial gas flows: sheath gas G1 = 20 l/min, plasma gas G2 = 2.4 l/min, transport gas G3 = 3.4 l/min. Calculations have been performed within the frame of the method of the control volume. The results show that the injection of transport gas in the axis plasma zone leads to a strong disturbance of a thermal equilibrium and a cooling of the axis zone.

RÉFÉRENCES

  1. Dresvin, S., Physics and Technology of Low Temperature Plasmas.

  2. Dresvin, S., The fundamental of Theory and Design of H.F. Plasma Generators.

  3. Gao, G., Mostaghimi, J., and Sakuta, 14th International Symposium on Plasma Chemistry.

  4. Patankar, S., Numerical Heat Transfer and Fluid Flow.

  5. Dresvin, S., Amouroux, J., and Nguen Quoc Shi, High Temp. Material Processes.


Articles with similar content:

CALCULATION OF RF PLASMA TORCH PARAMETERS BY MEANS OF NON−EQUILIBRIUM MODEL OF AR PLASMA
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
D. Ivanov, Jacques Amouroux, Shi Nguen-Kuok, Sergey V. Dresvin
CALCULATION OF RF PLASMA TORCH PARAMETERS BY MEANS OF NON-EQUILIBRJUM MODEL OF AR PLASMA
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.5, 2001, issue 1
D. Ivanov, Jacques Amouroux, Nguyen Kuok - Shi, Sergey V. Dresvin
CALCULATION OF PLASMA PARAMETERS IN A RF ICP TORCH BY NON-EQUILIBRIUM MODEL OF AR PLASMA
Progress in Plasma Processing of Materials, 2003, Vol.0, 2003, issue
D. Ivanov, Jacques Amouroux, Sergey V. Dresvin, Nguen Quoc Shi
INVESTIGATION OF DUSTED JET OF RF PLASMA TORCH
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Jacques Amouroux, Sergey V. Dresvin, O. N. Feygenson , Daniel Morvan, S. G. Zverev
CHARACTERISATION OF AL2O3 PLASMA SPRAYING BY ATOMIC EMISSION SPECTROSCOPY AND NEAR INFRARED PYROMETRY
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.15, 2011, issue 2
J. M. Badie, Ph. Bertrand, I. Yu. Smurov, G. Colonges