High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Publication de 4 numéros par an
ISSN Imprimer: 1093-3611
ISSN En ligne: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
Volume 11, 2007 Numéro 1
DOI: 10.1615/HighTempMatProc.v11.i1
MODELING OF THE SYNTHESIS AND SUBSEQUENT GROWTH OF NANOPARTICLES IN DUSTY PLASMAS
pp. 21-36
DOI: 10.1615/HighTempMatProc.v11.i1.20
EROSION OF THE TUNGSTEN CATHODE IN A COMMERCIAL PLASMATRON
pp. 37-42
DOI: 10.1615/HighTempMatProc.v11.i1.30
HYDRODYNAMIC AND ELECTRIC CHARACTERISTICS OF PLASMATRONS UNDER LAMINAR AND TURBULENT FLOW REGIMES
pp. 43-58
DOI: 10.1615/HighTempMatProc.v11.i1.40
ANALYSIS OF PLASMA JETS GENERATED IN GAS AND GAS-WATER TORCHES
pp. 59-70
DOI: 10.1615/HighTempMatProc.v11.i1.50
SYNTHESIS AND PROPERTIES OF NANO-STRUCTURED SOFC ANODE DEPOSITS
pp. 83-94
DOI: 10.1615/HighTempMatProc.v11.i1.70
SUPER HIGH RATE DEPOSITION OF HOMO- AND HETERO-EPITAXIAL SILICON THICK FILMS BY MESO-PLASMA CVD
pp. 103-113
DOI: 10.1615/HighTempMatProc.v11.i1.90
Effect of thermo-capillary (Marangoni) convection in Electronic Discharge Machining (EDM)
pp. 115-124
DOI: 10.1615/HighTempMatProc.v11.i1.100
ADVANCES IN THE DETECTION OF CHEMICAL AND BIOLOGICAL AEROSOLIZED POLLUTANTS BY MEANS OF A FIELD-TRANSPORTABLE LASER-INDUCED BREAKDOWN SPECTROSCOPY-BASED DETECTOR
pp. 125-147
DOI: 10.1615/HighTempMatProc.v11.i1.110
VARIATION OF ENERGY EFFICIENCY IN OXIDE REMOVAL USING CATHODE SPOTS WITH ELECTRODE-GAP WIDTH
pp. 149-159
DOI: 10.1615/HighTempMatProc.v11.i1.120
Dernier numéro
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE
INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Prochains articles
Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products