Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimer: 1093-3611
ISSN En ligne: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v11.i3.60
pages 383-391

SURFACE ALLOYING OF METALS USING A QUASI-STATIONARY PLASMA ACCELERATOR

Vladimir V. Uglov
Belarusian State University, 4 Nezavisimost Ave., Minsk, 220030, Belarus; National Research Tomsk Polytechnic University, 2a Lenin Ave., Tomsk, 634028, Russia
Nikolai N. Cherenda
Belarusian State University, 4 Nezavisimost Ave., Minsk, 220030, Belarus; South-Urals State University, 76 Lenin Ave., Chelyabinsk, 454080, Russia
V. M. Anishchik
Belarussian State University, 4 Nezavisimost Ave., Minsk, 220030, Belarus
A. K. Stalmashonak
Belarusian State University, 4, F.Nezavisimosti ave., 220030 Minsk, Belarus
A. G. Kononov
Belarusian State University, 4 Nezavisimosti ave., 220030 Minsk, Belarus
Yu. A. Petuhov
Belarusian State University, 4 Nezavisimosti ave., 220030 Minsk, Belarus
V. M. Astashinski
Institute of Mathematics, National Academy of Sciences of Belarus, Minsk, Belarus
A. M. Kuzmitski
A. V. Luikov Heat and Mass Transfer Institute, National Academy of Sciences of Belarus, 15, P. Brovki Str, Minsk 220072, Belarus

RÉSUMÉ

The main regularities of Al and Ni surface alloying by means of compression plasma flows treatment of Ti/Al and Zr/Ni (coating/substrate) systems were investigated in this work. X-Ray diffraction, Rutherford backscattering and scanning electron microscopy were used as investigation techniques. It was found that a mixed layer contained intermetallides (Al3Ti, Al2Ti or Ni5Zr) and nitrides (AlN, TiN or ZrN) providing microhardness increase. The phase composition of the mixed layer is correlated with the phase composition given by the equilibrium phase diagram. Thus, compression plasma flows can be effectively used for the predictable formation of a variety of alloys in the surface layer of metals by means of “coating/substrate” system treatment.


Articles with similar content:

OXIDATION RESISTANCE OF STEEL SURFACE LAYER ALLOYED BY Mo AND Cr UNDER THE ACTION OF COMPRESSION PLASMA FLOWS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.23, 2019, issue 3
Valiantsin M. Astashynski, Nikolai N. Cherenda, A. M. Kuzmitski, V. Yu. Nichipor
SYNTHESIS OF SURFACE LAYERS HARDENED BY METAL TRIALUMINIDE COMPOUND IN Al−Si ALLOY UNDER COMPRESSION PLASMA FLOWS IMPACT
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.18, 2014, issue 1-2
Valiantsin M. Astashynski, Nikolai N. Cherenda, N. V. Bibik, A. M. Kuzmitski, Vladimir V. Uglov
EFFECTS OF THE DC BIAS APPLIED TO A MG MOLTEN SILICON BATH ON ITS PURIFICATION BY RF THERMAL PLASMA
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.13, 2009, issue 3-4
S. Rousseau, Daniel Morvan, M. Benmansour
PARAMETERS OF CHEMICAL VAPOR DEPOSITION ON A STRUCTURE AND THE PROPERTIES OF NANOSTRUCTURED TaC COATING ON A CARBON COMPOSITE MATERIAL
Nanoscience and Technology: An International Journal, Vol.5, 2014, issue 3
K. Chuprunov, A. Yudin, V. N. Anikin, Denis Leybo, S. A. Eremin, I. N. Burmistrov, D. V. Kuznetsov
CHARACTERISATION OF A NEW GOLD CATALYST SUPPORTED ON MIXED OXIDES FOR PURE HYDROGEN PRODUCTION AND PURIFICATION
HYSYDAYS
1st World Congress of Young Scientists on Hydrogen Energy Systems, Vol.0, 2005, issue
Flora Boccuzzi, Maela Manzoli, Anna Chiorino, Floriana Vindigni