Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Multiphase Science and Technology
SJR: 0.124 SNIP: 0.222 CiteScore™: 0.26

ISSN Imprimer: 0276-1459
ISSN En ligne: 1943-6181

Multiphase Science and Technology

DOI: 10.1615/MultScienTechn.v19.i3.20
pages 225-240

HEAT TRANSFER AND LIQUID MOTION OF FORCED CONVECTIVE BOILING IN A MINI-TUBE FOR AQUEOUS SOLUTIONS WITH NONLINEAR SURFACE ENERGY

Naoki Ono
Department of Mechanical Engineering, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-ku, Tokyo 135-8548, Japan
T. Yoshida
Department of Mechanical Engineering, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-ku, Tokyo 135-8548, Japan
Masahiro Shoji
Department of Mechanical Engineering, Kanagawa University, 3-27-1 Rokkakubashi, Kanagawa-ku, Yokohama, Kanagawa 221-8686; and Energy Technology Research Institute, AIST, 1-2-1 Namiki, Tsukuba, Ibaraki 305-8564, Japan
Fumio Takemura
Energy Technology Research Institute, AIST, 1-2-1 Namiki, Tsukuba, Ibaraki 305-8564, Japan
T. H. Yen
Energy Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST); and Nissan Motors Co., Ltd., 560-2, Okatsukoku, Atsugi, Kanagawa 243-0192, Japan

RÉSUMÉ

The value of the surface tension of aqueous solutions of some alcohol, such as butanol, increases from above some temperature when the solution is heated. Evaporation heat transfer of such a nonlinear solution was experimentally investigated. Butanol aqueous solution was adopted as the test fluid. The direction of thermocapillary force in liquid film of a nonlinear surface energy solution on a heated surface acts in the same direction to solute Marangoni force. The surface tension effects are expected to be marked in small-scale systems. The aim of the present study is to investigate the effect of the nonlinear surface tension of butanol aqueous solution on the liquid motion and heat transfer in convective boiling in a single mini channel. The quartz tube whose ID was 1 mm was applied as the test mini tube. The mass flux of the butanol solution was 1.96 kg/m2s. Prior to the experiments, the measurement of the surface tension of the butanol aqueous solution was performed by Wilhelmy's method to compare to the ethanol solution and pure water. From the convective boiling experiments, it was found that the temperature of the outer surface of the tube was much lower in the case of the butanol aqueous solution, at the region where the vapor quality was unity, than in the case of pure water. The liquid droplet motions were also observed by CCD video camera system.


Articles with similar content:

DRYOUT AND EVAPORATION HEAT TRANSFER OF FORCED CONVECTIVE FLOW IN A MINI-TUBE FOR AQUEOUS SLUTIONS WITH NONLINEAR SURFACE ENERGY
International Heat Transfer Conference 13, Vol.0, 2006, issue
Masahiro Shoji, T. H. Yen, Naoki Ono, T. Yoshida, Fumio Takemura
CONTRIBUTION OF LATENT HEAT TRANSFER IN POOL BOILING
International Heat Transfer Conference 16, Vol.4, 2018, issue
Takanori Tanaka, Tomohide Yabuki, Koji Miyazaki
ELECTROMAGNETIC WAVE SCATTERING BY A CURVED SCREEN OF FINITE THICKNESS
Telecommunications and Radio Engineering, Vol.71, 2012, issue 5
D. D. Ivanchenko, P. N. Melezhik, I. O. Sukharevsky, S. V. Nechitaylo
RADIATIVE COOLING BY USING A SLAB OF HEXAGONAL BORON NITRIDE
International Heat Transfer Conference 16, Vol.22, 2018, issue
Ceji Fu, Xiaohu Wu
EXPERIMENTAL STUDY ON PULSATING HEAT PIPE USING SELF-REWETTING FLUID AS A WORKING FLUID: VISUALIZATION OF THIN LIQUID FILM AND SURFACE WAVE
Heat Pipe Science and Technology, An International Journal, Vol.6, 2015, issue 1-2
Takao Inamura, Koji Fumoto, Takuya Ishida, Tsuyoshi Kawanami