Publication de 6 numéros par an
ISSN Imprimer: 1543-1649
ISSN En ligne: 1940-4352
Indexed in
AN EFFICIENT GEOMETRIC RECONSTRUCTION OF MESOSCALE CONCRETE STRUCTURES ACCOUNTING FOR CONFINEMENT SCENARIOS
RÉSUMÉ
An efficient numerical modeling of concrete composites requires both the definition of the correct geometrical reconstruction of samples and the development of a sound model for the service and ultimate loads. This work proposes a procedure (characterized by the adoption of laser scanner techniques combined with CAD, X-ray computed tomography, and a particle random disposition algorithm) for reproducing a finite element model of concrete at the mesoscale in terms of particle packing and representation of material heterogeneities, together with a nonlinear constitutive characterization developed in the framework of nonassociated plasticity coupled with damage. The approach is validated against a typical experiment of structural collapse of concrete samples subjected to uniaxial compression, where the cement paste fails under aggregates confinement.
-
Abaqus Software, Version 6.14, Dassault Systemes Simulia Corporation, Providence, Rhode Island, USA, 2014.
-
Bazant, Z.P. and Lin, F.B., Non-Local Yield Limit Degradation, Int. J. Numer. Methods Eng., vol. 26, no. 8, pp. 1805-1823,1988.
-
Bobinski, J. and Tejchman, J., Numerical Simulations of Localization of Deformation in Quasi-Brittle Materials within Non-Local Softening Plasticity, Comput. Concr., vol. 1, no. 4, pp. 433-455, 2004.
-
Cervenka, J. and Papanikolaou, V.K., Three-Dimensional Combined Fracture-Plastic Material Model for Concrete, Int. J. Plasticity, vol. 24, pp. 2192-2220, 2008.
-
deBorst, R., Simulation of Strain Localization: A Reappraisal of the Cosserat Continuum, Eng. Comput, vol. 8, no. 4, pp. 317-332, 1991.
-
Decreto Ministeriale, Norme Tecniche Per Le Costruzioni, Italy, 17/01/2018.
-
Faleschini, F., Brunelli, K., Zanini, M.A., Dabala, M., and Pellegrino, C., Electric Arc Furnace Slag as Coarse Recycled Aggregate for Concrete Production, J. Sustainable Metall., vol. 2, no. 1, pp. 44-50, 2016.
-
Fathifazl, G., Razaqpur, A.G., Burkan Isgors, O., Abbas, A., Fournier, B., and Foo, S., Performance and Properties of Structural Concrete Made with Recycled Concrete Aggregate, Eng. Struct., vol. 33, no. 3, pp. 1025-1033, 2011.
-
Garboczi, E., Three-Dimensional Mathematical Analysis of Particle Shape Using X-Ray Tomography and Spherical Harmonics: Application to Aggregates Used in Concrete, Cem. Concr. Res., vol. 32, no. 10, pp. 1621-1638, 2002.
-
Grassl, P., Lundgren, K., and Gyltoft, K., Concrete in Compression: a Plasticity Theory with a Novel Hardening Law, Int. J. Solids Struct., vol. 39, no. 20, pp. 5205-5223, 2002.
-
Grassl, P., Xenos, D., Nystrom, U., Rempling, R., and Gylltoft, K., CDPM2: A Damage-Plasticity Approach to Modelling the Failure of Concrete, Int. J. Solids Struct., vol. 50, pp. 3805-3816, 2013.
-
Huang, Y., Yang, Z., Ren, W., Liu, G., and Zhang, C., 3D Meso-Scale Fracture Modelling and Validation of Concrete based on In-Situ X-Ray Computed Tomography Images Using Damage Plasticity Model, Int. J. Solids Struct., vols. 67-68, pp. 340-352, 2015.
-
Huang, Y., Yan, D., Yang, Z., and Liu, G., 2D and 3D Homogenization and Fracture Analysis of Concrete based on In-Situ X-Ray Computed Tomography Images and Monte Carlo Simulations, Eng. Fract. Mech., vol. 163, pp. 37-54, 2016.
-
Jirasek, M. and Rolshoven, S., Comparison of Integral-Type Nonlocal Plasticity Models for Strain-Softening Materials, Int. J. Eng. Sci., vol. 41, nos. 13-14, pp. 1553-1602, 2003.
-
Kenawy, M., Kunnath, S., Kolwankar, S., and Kanvinde, A., Fiber-Based Nonlocal Formulation for Simulating Softening in Reinforced Concrete Beam-Columns, J. Struct. Eng., vol. 144, no. 12, p. 04018217, 2018.
-
Lazari, M., Sanavia, L., and Schrefler, B.A., Local and Non-Local Elastoviscoplasticity in Strain Localization Analysis of Multiphase Geomaterials, Int. J. Numer. Anal. Methods Geomech., vol. 39, pp. 1570-1592, 2015.
-
Lee, J. and Fenves, G.L., Plastic-Damage Model for Cyclic Loading of Concrete Structures, ASCE J. Eng. Mech, vol. 124, pp. 892-900, 1998.
-
Mazars, K.J., Hamon, F., and Grange, S., A New 3D Damage Model for Concrete under Monotonic, Cyclic and Dynamic Loadings, Mater. Struct., vol. 48, no. 11, pp. 3779-3793, 2015.
-
Mazzucco, G., Pomaro, B., Salomoni, V., and Maiorana, C., Numerical Modelling of Ellipsoidal Inclusions, Construct. Build. Mater., vol. 167, pp. 317-324,2018a.
-
Mazzucco, G., Pomaro, B., Salomoni, V., and Majorana, C., Apex Control within an Elasto-Plastic Constitutive Model for Confined Concretes, Math. Comput. Simul., vol. 162, pp. 221-232, 2019.
-
Mazzucco, G., Xotta, G., Pomaro, B., Salomoni, V., and Faleschini, F., Elastoplastic-Damaged Meso-Scale Modelling of Concrete with Recycled Aggregates, Composites Part B, vol. 140, pp. 145-156, 2018b.
-
Menetrey, P. and Willam, K.J., Triaxial Failure Criterion for Concrete and Its Generalization, ACIStruct. J., vol. 92, no. 3, pp. 311-318, 1995.
-
Open Technologies, Aurum: Designed to Acquire Small Parts down to the Tiniest Details, from http://www.opentechnologies.it/en/products/scanner-3d-eng/industrial-line/aurum/, 2019.
-
Pellegrino, C., Cavagnis, P., Faleschini, F., and Brunelli, K., Properties of Concretes with Black/Oxidizing Electric Arc Furnace Slag Aggregate, Cem. Concr. Compos., vol. 37, pp. 232-240, 2013.
-
Rondi, L., Bregoli, G., Sorlini, S., Cominoli, L., Collivignarelli, C., and Plizzari, G., Concrete with EAF Steel Slag as Aggregate: A Comprehensive Technical and Environmental Characterization, Composites PartB, vol. 90, pp. 195-202, 2016.
-
Sauro, S., L'uso Delle Materie Prime Secondarie nelle Opere di Costruzione: Applicazione ad un Caso Studio di Edilizia Sociale, Master's, University ofPadova, Italy, 2015.
-
Shayan, A. and Xu, A., Shear Capacity Evaluation of Steel Reinforced Recycled Concrete (RRC) Beams, ACI Mater. J, vol. 100, no. 5, pp. 371-380,2003.
-
Siemens, Siemens PLM Software: NX, from https://www.team3d.it/nx-2/, 2019.
-
Volumegraphics, VGSTUDIO MAX, High-End Software for CT Data, from https://www.volumegraphics.com/en/products/ vgstudio-max.html, 2019.
-
Wenzel Group, exaCT M CT-Workstation, from http://www.wenzel-group.com/en/products/ct workstation-exact-m/ 2019.
-
Willam, K.J. and Warnke, E.P., Constitutive Models for the Triaxial Behavior of Concrete, Proc. Int. Assoc. Bridge Struct. Eng., vol. 19, pp. 1-30, 1975.
-
Mazzucco Gianluca, Pomaro Beatrice, Xotta Giovanna, Garbin Enrico, Salomoni Valentina, De Marchi Nico, Experimental and Numerical Characterization of Normal-Weight Concrete at the Mesoscale, Journal of Materials in Civil Engineering, 34, 7, 2022. Crossref
-
Ma Jianjun, Chen Junjie, Chen Wanxiang, Huang Linchong, A coupled thermal-elastic-plastic-damage model for concrete subjected to dynamic loading, International Journal of Plasticity, 153, 2022. Crossref
-
Park Taehyo, Ahmed Bilal, Voyiadjis George Z, A review of continuum damage and plasticity in concrete: Part I – Theoretical framework, International Journal of Damage Mechanics, 31, 6, 2022. Crossref