Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.244 SNIP: 0.434 CiteScore™: 0.7

ISSN Imprimer: 1940-2503
ISSN En ligne: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.2012003941
pages 131-135

A LATTICE MONTE CARLO ANALYSIS ON CHEMICAL REACTION WITH MOVING BOUNDARY

Thomas Fiedler
Centre for Mass and Thermal Transport in Engineering Materials, The University of Newcastle, Callaghan, School of Engineering, NSW 2308, Australia
Irina V. Belova
Centre for Mass and Thermal Transport in Engineering Materials, The University of Newcastle, Callaghan, School of Engineering, NSW 2308, Australia
Andreas Ochsner
Centre for Mass and Thermal Transport in Engineering Materials, The University of Newcastle, Callaghan ; Department of Solid Mechanics and Design, Faculty of Mechanical Engineering, University of Technology Malaysia - UTM UTM Skudai, Johor, Malaysia; Griffith University, Australia
Graeme Murch
Centre for Mass and Thermal Transport in Engineering Materials, The University of Newcastle, Callaghan, School of Engineering, NSW 2308, Australia

RÉSUMÉ

The current paper aims to simulate combined mass diffusion and chemical reaction. Two solid reactants are brought into contact and the product is formed at the interface. Chemical reaction is assumed to occur instantaneously, thus the reaction rate is limited only by the interdiffusion of the two solid constituents. First, parametric studies for a range of constant diffusivities are performed and simple relations for the growth of the product phase are obtained. It is found that the thickness of the product layer increases proportionally to the square root of the product of diffusivity and time. In the second part of the analyses the formation of NiAl by interdiffusion of nickel and aluminum is simulated. This self-propagating exothermic reaction is of great interest for joining temperature-sensitive components. Within the limits of these calculations, the concentration dependence of the diffusion coefficients of nickel and aluminum is considered in order to improve the accuracy of the simulation.


Articles with similar content:

THE VOIDS FORMATION IN Ni–Cu ALLOYS
International Journal for Multiscale Computational Engineering, Vol.15, 2017, issue 4
Patrycja Wierzba, Bartek Wierzba, Wojciech Jerzy Nowak, Stanislaw Wedrychowicz, Zbigniew Grzesik
ANALYSIS OF PREDICTIVE CAPABILITIES OF MULTISCALE PHASE TRANSFORMATION MODELS BASED ON THE NUMERICAL SOLUTION OF HEAT TRANSFER AND DIFFUSION EQUATIONS
International Journal for Multiscale Computational Engineering, Vol.15, 2017, issue 5
Krzysztof Bzowski, Maciej Pietrzyk, Monika Pernach, Lukasz Rauch
PREDICTION OF THERMAL HISTORY IN LASER METAL DEPOSITION
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.22, 2018, issue 1
Ajitanshu Vedrtnam, Saurav Kumar
Study of Heat Transfer and Metallurgical Structure in the Continuous Casting of Aluminium and Aluminium Alloys
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 1979, issue
L. Jovic, M. N. Novakovic, D. Spasojevic, V. Stefanovic
Experimental investigation on transfer-reaction characteristics in porous media
International Heat Transfer Conference 12, Vol.27, 2002, issue
Bu-Xuan Wang, L. Jia, Xiao-Feng Peng, Yonghua Yan