Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Atomization and Sprays
Facteur d'impact: 1.189 Facteur d'impact sur 5 ans: 1.596 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimer: 1044-5110
ISSN En ligne: 1936-2684

Volumes:
Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2012005599
pages 371-389

ONE-DIMENSIONAL MODEL FOR THE PREDICTION OF IMPACT DYNAMICS OF A SHEAR-THINNING LIQUID DROP ON DRY SOLID SURFACES

Sang Mo An
Severe Accident & PHWR Safety Research Division, Korea Atomic Energy Research Institute, 989-111 Daedeok-daero, Yuseong-gu, Daejeon, 305-353, Republic of Korea
Sang Yong Lee
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea

RÉSUMÉ

This study proposes a 1D model that describes the time variations of the spreading ratio for a non-Newtonian (shear-thinning) liquid drop impinging on dry solid surfaces. This model is based on the previous model developed for Newtonian liquids, where an energy balance approach with a cylindrical disk approximation was adopted and the dissipation mechanism near the contact line was taken into account. The present model showed good predictions for the spreading behavior, and accordingly the maximum spreading ratios were predicted with 97% of the data within ±10% accuracy. Also, the model predictions of the receding behavior for a low-viscosity drop impinging on a hydrophobic surface were in good agreement with the experiments. However, the discrepancy in the receding behavior became larger for the higher-viscosity drop impacting on a hydrophilic surface because the contact angle hysteresis appears more prominent. Based on this model, the time variations of the liquid viscosity for an impinging shear-thinning drop were simulated, and the effects of non-Newtonian liquid rheological parameters in the Cross model on the postimpingement behavior were also examined in detail. Consequently, it was found that the liquid viscosity in a high shear rate range dominates the spreading and receding behavior of a shear-thinning drop.


Articles with similar content:

Development of a Diesel Spray Atomization Model Considering Nozzle Flow Characteristics
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 4-6
Kang Y. Huh, Eunju Lee, Jaye Koo
STATIC AND DYNAMIC DROP FORMATION ON DOWNWARD-FACING NOZZLES
Atomization and Sprays, Vol.23, 2013, issue 7
Michael Zeilmann, U. Acikel, Mathias Etzold, Franz Durst, R. Gautam
EFFECTS OF PSEUDOPLASTICITY ON SPREAD AND RECOIL DYNAMICS OF AQUEOUS POLYMERIC SOLUTION DROPLETS ON SOLID SURFACES
Interfacial Phenomena and Heat Transfer, Vol.1, 2013, issue 3
Raj M. Manglik, Vishaul Ravi, Milind A. Jog
DEVELOPMENT OF AN IMPROVED SPRAY/WALL INTERACTION MODEL FOR DIESEL-LIKE SPRAY IMPINGEMENT SIMULATIONS
Atomization and Sprays, Vol.25, 2015, issue 7
Rolf D. Reitz, Qi Jiao, Peng Deng, Zhiyu Han
BEHAVIOR OF A WATER DROP IMPINGING ON POROUS SUBSTRATES − EXAMINATION OF CONTACT-LINE DRAG EFFECT
Atomization and Sprays, Vol.26, 2016, issue 3
Woo Shik Kim, Sang Yong Lee