Publication de 12 numéros par an
ISSN Imprimer: 1044-5110
ISSN En ligne: 1936-2684
Indexed in
A CFD ANALYSIS OF THE INFLUENCE OF DIESEL NOZZLE GEOMETRY ON THE INCEPTION OF CAVITATION
RÉSUMÉ
An extensive computational fluid dynamics (CFD) study has been performed in order to analyze the influence of nozzle geometry on the internal flow characteristics of a diesel injector. The flow through cylindrical and conical nozzles with different grades of hydro-grinding and at various needle lift positions and injection pressures was calculated to observe the individual effect of these parameters on the inception of cavitation. Most calculations were based on the assumption that the nozzle flow is axisymmetric. The set of calculations that was carried out to identify the most influential parameters for the onset of cavitation was determined by means of an experimental design technique. A correlation study was made in order to obtain a numerical expression that relates the critical cavitation number to geometric dimensions. Experiments were performed to validate both numerical calculations and conditions at which cavitation appears.
-
Kastengren A, Powell C F, Spray density measurements using X-ray radiography, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221, 6, 2007. Crossref
-
Bermúdez V, Payri R, Salvador F J, Plazas A H, Study of the influence of nozzle seat type on injection rate and spray behaviour, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219, 5, 2005. Crossref
-
Benajes J., Molina S., González C., Donde R., The role of nozzle convergence in diesel combustion, Fuel, 87, 10-11, 2008. Crossref
-
Payri R., Salvador F.J., Gimeno J., Zapata L.D., Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions, Fuel, 87, 7, 2008. Crossref
-
Salvador F.J., Ruiz S., Gimeno J., De la Morena J., Estimation of a suitable Schmidt number range in diesel sprays at high injection pressure, International Journal of Thermal Sciences, 50, 9, 2011. Crossref
-
Salvador F J, Hoyas S, Novella R, Martínez-López J, Numerical simulation and extended validation of two-phase compressible flow in diesel injector nozzles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225, 4, 2011. Crossref
-
Payri F., Bermúdez V., Payri R., Salvador F.J., The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles, Fuel, 83, 4-5, 2004. Crossref
-
Payri R., Salvador F.J., Gimeno J., De la Morena J., Influence of injector technology on injection and combustion development – Part 1: Hydraulic characterization, Applied Energy, 88, 4, 2011. Crossref
-
Payri R., Salvador F.J., Martí-Aldaraví P., Martínez-López J., Using one-dimensional modeling to analyse the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Detailed injection system model, Energy Conversion and Management, 54, 1, 2012. Crossref
-
Salvador F.J., Gimeno J., De la Morena J., Carreres M., Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Results of the simulations and discussion, Energy Conversion and Management, 54, 1, 2012. Crossref
-
Salvador F.J., Martínez-López J., Caballer M., De Alfonso C., Study of the influence of the needle lift on the internal flow and cavitation phenomenon in diesel injector nozzles by CFD using RANS methods, Energy Conversion and Management, 66, 2013. Crossref
-
Salvador F.J., Romero J.-V., Roselló M.-D., Martínez-López J., Validation of a code for modeling cavitation phenomena in Diesel injector nozzles, Mathematical and Computer Modelling, 52, 7-8, 2010. Crossref
-
Payri F., Payri R., Salvador F.J., Martínez-López J., A contribution to the understanding of cavitation effects in Diesel injector nozzles through a combined experimental and computational investigation, Computers & Fluids, 58, 2012. Crossref
-
Payri R., Salvador F.J., Gimeno J., Novella R., Flow regime effects on non-cavitating injection nozzles over spray behavior, International Journal of Heat and Fluid Flow, 32, 1, 2011. Crossref
-
Payri R., Tormos B., Gimeno J., Bracho G., The potential of Large Eddy Simulation (LES) code for the modeling of flow in diesel injectors, Mathematical and Computer Modelling, 52, 7-8, 2010. Crossref
-
Payri R., Salvador F.J., Gimeno J., de la Morena J., Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber, International Journal of Heat and Fluid Flow, 30, 4, 2009. Crossref
-
Molina S., Salvador F.J., Carreres M., Jaramillo D., A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles, Energy Conversion and Management, 79, 2014. Crossref
-
Payri R., Gil A., Plazas A.H., Giménez B., Influence of Nozzle Seat Type on Internal Flow of Convergent Nozzles, SAE Technical Paper Series, 1, 2004. Crossref
-
Salvador F.J., Carreres M., Jaramillo D., Martínez-López J., Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics, Energy Conversion and Management, 103, 2015. Crossref
-
Desantes J. M., Payri R., Salvador F. J., de la Morena. J., Cavitation effects on spray characteristics in the near-nozzle field, SAE Technical Paper Series, 1, 2009. Crossref
-
Payri F., Arrègle J., López J. J., Hermens S., Effect of Cavitation on the Nozzle Outlet Flow, Spray and Flame Formation in a Diesel Engine, SAE Technical Paper Series, 1, 2006. Crossref
-
Salvador F. J., Marti-Aldaravi P., Carreres M., Jaramillo D., An Investigation on the Dynamic Behaviour at Different Temperatures of a Solenoid Operated Common-Rail Ballistic Injector by means of a One-Dimensional Model, SAE Technical Paper Series, 1, 2014. Crossref
-
He Zhixia, Tao Xicheng, Zhong Wenjun, Leng Xianyin, Wang Qian, Zhao Peng, Experimental and numerical study of cavitation inception phenomenon in diesel injector nozzles, International Communications in Heat and Mass Transfer, 65, 2015. Crossref
-
Salvador F.J., Carreres M., Jaramillo D., Martínez-López J., Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles, Energy Conversion and Management, 105, 2015. Crossref
-
Desantes J. M., Payri R., Salvador F. J., Soare V., Study of the Influence of Geometrical and Injection Parameters on Diesel Sprays Characteristics in Isothermal Conditions, SAE Technical Paper Series, 1, 2005. Crossref
-
Payri F., Payri R., Salvador F. J., Gimeno J., Comparison between Different Hole to Hole Measurement Techniques in a Diesel Injection Nozzle, SAE Technical Paper Series, 1, 2005. Crossref
-
Payri F., Payri R., Salvador F. J., Gimeno J., Influence of Nozzle Geometry on Spray Characteristics in Non-evaporative and Evaporative Conditions, SAE Technical Paper Series, 1, 2007. Crossref
-
Desantes José M., Arrègle Jean, López J. Javier, Hermens Sjoerd, Experimental characterization of outlet flow for different diesel nozzle geometries, SAE Technical Paper Series, 1, 2005. Crossref
-
Payri Raul, Molina S., Salvador F. J., Gimeno J., A study of the relation between nozzle geometry, internal flow and sprays characteristics in diesel fuel injection systems, KSME International Journal, 18, 7, 2004. Crossref
-
Anvari Simin, Taghavifar Hadi, Khalilarya Shahram, Jafarmadar Samad, Shervani-Tabar Mohammad Taghi, Numerical simulation of diesel injector nozzle flow and in-cylinder spray evolution, Applied Mathematical Modelling, 40, 19-20, 2016. Crossref
-
Desantes José María, Salvador Francisco Javier, Carreres Marcos, Martínez-López Jorge, Large-eddy simulation analysis of the influence of the needle lift on the cavitation in diesel injector nozzles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229, 4, 2015. Crossref
-
Knox Benjamin W, Genzale Caroline L, Reduced-order numerical model for transient reacting diesel sprays with detailed kinetics, International Journal of Engine Research, 17, 3, 2016. Crossref
-
Payri R, Salvador F J, Gimeno J, García A, Flow regime effects over non-cavitating diesel injection nozzles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 226, 1, 2012. Crossref
-
Salvador FJ, De la Morena J, Crialesi-Esposito M, Martínez-López J, Comparative study of the internal flow in diesel injection nozzles at cavitating conditions at different needle lifts with steady and transient simulations approaches, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232, 8, 2018. Crossref
-
Salvador Francisco J, Plazas Alejandro H, Gimeno Jaime, Carreres Marcos, Complete modelling of a piezo actuator last-generation injector for diesel injection systems, International Journal of Engine Research, 15, 1, 2014. Crossref
-
Yuan Cong, Song Jinchun, Liu Minghe, Comparison of compressible and incompressible numerical methods in simulation of a cavitating jet through a poppet valve, Engineering Applications of Computational Fluid Mechanics, 13, 1, 2019. Crossref
-
Sun Yubiao, Guan Zhiqiang, Hooman Kamel, Cavitation in Diesel Fuel Injector Nozzles and its Influence on Atomization and Spray, Chemical Engineering & Technology, 42, 1, 2019. Crossref
-
Thongchai Sakda, Lim Ocktaeck, Influence of Biodiesel Blended in Gasoline-Based Fuels on Macroscopic Spray Structure from a Diesel Injector, International Journal of Automotive Technology, 20, 4, 2019. Crossref
-
Prater Russell, Lian Yongsheng, Detached Eddy Simulation Simulation of Asymmetrical Flow in a High Pressure Diesel Injector, Journal of Engineering for Gas Turbines and Power, 139, 11, 2017. Crossref
-
Mouvanal Sandeep, Burkhardt Axel, Bakshi Shamit, Chatterjee Dhiman, Numerical study of purging of a gasoline direct injection nozzle at the end of injection, International Journal of Engine Research, 22, 5, 2021. Crossref
-
Atmaca Mustafa, Çetin Berkay, Ezgi Cüneyt, Kosa Ergin, CFD analysis of jet flows ejected from different nozzles, International Journal of Low-Carbon Technologies, 16, 3, 2021. Crossref
-
Jasper Sarah, Hussong Jeanette, Lindken Ralph, PIV investigation of high Reynolds number submerged water jets at high-pressure ambient conditions, Experiments in Fluids, 62, 5, 2021. Crossref
-
Jasper Sarah, Gradzki Daniel P., Bracke Rolf, Hussong Jeanette, Petermann Marcus, Lindken Ralph, Nozzle Cavitation and Rock Erosion Experiments Reveal Insight into the Jet Drilling Process, Chemie Ingenieur Technik, 93, 10, 2021. Crossref
-
Chen Chen, Yu Shenghao, Yin Bifeng, Bi Qinsheng, Jia Hekun, Investigation of inner flow and near-field spray patterns of the non-circular diesel injector, Sādhanā, 47, 1, 2022. Crossref
-
Yuan Cong, Zhu Lisha, Du Zunling, Liu Shiqi, Numerical investigation into the cavitating jet inside water poppet valves with varied valve seat structures, Engineering Applications of Computational Fluid Mechanics, 15, 1, 2021. Crossref
-
Liu Jingbin, Liu Zhenming, Wu Jiechang, Li Ziming, Chen Ping, Gu Xiaolei, Visualization experiment and numerical calculation of the cavitation evolution inside the injector ball valve, Fuel, 329, 2022. Crossref
-
Yin Bifeng, Ye Ze, Jia Hekun, Yu Shenghao, Deng Weixin, Experimental Study on the Penetration of Diesel and Biodiesel Spray Liquid Emerging from an Equilateral Triangular Orifice under Evaporative Conditions, Journal of Thermal Science, 31, 5, 2022. Crossref