Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Atomization and Sprays
Facteur d'impact: 1.189 Facteur d'impact sur 5 ans: 1.596 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimer: 1044-5110
ISSN En ligne: 1936-2684

Volumes:
Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017018958
pages 579-589

GEOMETRIC EFFECT ON SPRAY CHARACTERISTICS OF GAS-CENTERED SWIRL COAXIAL INJECTORS: RECESS RATIO AND GAP THICKNESS

Gujoeng Park
Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul, 08826, Republic of Korea
Jungho Lee
Engine Test and Evaluation Team, Korea Aerospace Research Institute, Daejeon, 34133, Republic of Korea
Ingyu Lee
KF-X Propulsion System Team, Korea Aerospace Industries, Ltd., Sacheon, 52529, Republic of Korea
Youngbin Yoon
Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul, 08826, Republic of Korea
Chae Hoon Sohn
Department of Mechanical Engineering, Sejong University, Seoul, 05006, Republic of Korea

RÉSUMÉ

The characteristics of gas-centered swirl coaxial (GCSC) injectors used in a staged-combustion cycle of Russian liquid-rocket engines were investigated. This study determined how the spray characteristics of GCSC injectors are influenced by the momentum flux ratio, gap thickness, and recess length used as important coaxial injector parameters. The film thickness and spray angle were measured by the electrical conductance and backlight image methods, respectively. The liquid film thickness and spray angle were changed according to the spray condition. The spray characteristics at low liquid pressure drop were sensitive to gas but not at high liquid pressure drop. The momentum flux ratio showed a better relationship with spray characteristics than the spray condition of liquid and gas, respectively. As the momentum flux ratio increased, the spray characteristics tended to decrease overall and this tendency occurred at a lower momentum flux ratio as the recess ratio increased. Also, the spray characteristics varied with the gap thickness. The liquid film thickness and spray angle were relatively low in small gaps, and were similar as the gap thickness increased.


Articles with similar content:

EFFECT OF FUEL DROPLET SIZE AND INJECTION TEMPERATURE ON THE PERFORMANCE OF KEROSENE-OXYGEN PULSE DETONATION ROCKET ENGINE
Atomization and Sprays, Vol.23, 2013, issue 8
Zhencen Fan, Wei Fan, Le Jin, Haoyi Song
EFFERVESCENT ATOMIZER OPERATION AND SPRAY CHARACTERISTICS
Atomization and Sprays, Vol.3, 1993, issue 2
J. D. Whitlow, Arthur H. Lefebvre
A STUDY ON DISCHARGE COEFFICIENTS OF CLOSED-TYPE SWIRL INJECTORS FOR A LIQUID ROCKET ENGINE
Atomization and Sprays, Vol.27, 2017, issue 7
Kyubok Ahn, Hwan-Seok Choi
EFFECT OF RECESS ON MIXING AND ATOMIZATION CHARACTERISTICS OF LIQUID-LIQUID SWIRL COAXIAL INJECTORS
Atomization and Sprays, Vol.20, 2010, issue 1
Poonggyoo Han, Sunghyuk Kim, Youngbin Yoon, Dongjun Kim
EFFECT OF AIR INJECTION CONFIGURATION ON THE ATOMIZATION OF GELLED JET A1 FUEL IN AN AIR-ASSIST INTERNALLY MIXED ATOMIZER
Atomization and Sprays, Vol.23, 2013, issue 4
Debi Prasad Mishra, Manisha B. Padwal