Publication de 12 numéros par an
ISSN Imprimer: 1044-5110
ISSN En ligne: 1936-2684
Indexed in
MODELING TEMPERATURE DISTRIBUTION INSIDE AN EMULSION FUEL DROPLET UNDER CONVECTIVE HEATING: A KEY TO PREDICTING MICROEXPLOSION AND PUFFING
RÉSUMÉ
Microexplosion/puffing is rapid disintegration of a water-in-oil emulsion droplet caused by explosive boiling of embedded superheated water sub-droplets. To predict microexplosion/puffing, modeling the temperature distribution inside an emulsion droplet under convective heating is a prerequisite, since the temperature field determines the location of nucleation (vapor bubble initiation from superheated water). In the first part of the present study, convective heating of water-in-oil emulsion droplets under typical combustor conditions is investigated using high-fidelity simulation in order to accurately model inner-droplet temperature distribution. The shear force due to the ambient air flow induces internal circulation inside a droplet. It has been found that for droplets under investigation in the present study, the liquid Peclet number PeL is in a transitional regime of 100 < PeL < 500. The temperature field is therefore somewhat distorted by the velocity field, but the distortion is not strong enough to form Hill's vortex for the temperature field. In the second part of the present study, a novel approach is proposed to model the temperature field distortion by introducing angular dependency of the thermal conductivity and eccentricity of the temperature field. The model can reproduce the main features of the temperature field inside an emulsion droplet, and can be used to predict the nucleation location, which is a key initial condition of microexplosion/puffing.
-
Shinjo J., Xia J., Combustion characteristics of a single decane/ethanol emulsion droplet and a droplet group under puffing conditions, Proceedings of the Combustion Institute, 36, 2, 2017. Crossref
-
Shinjo J., Xia J., Ganippa L. C., Megaritis A., Puffing-enhanced fuel/air mixing of an evaporating -decane/ethanol emulsion droplet and a droplet group under convective heating, Journal of Fluid Mechanics, 793, 2016. Crossref
-
Ismael Mhadi A., Heikal Morgan R., Aziz A. Rashid A., Syah Firman, Zainal A. Ezrann Z., Crua Cyril, The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions, Applied Energy, 222, 2018. Crossref
-
Umemura Akira, Shinjo Junji, Detailed SGS atomization model and its implementation to two-phase flow LES, Combustion and Flame, 195, 2018. Crossref
-
Wainwright Elliot R., Lakshman Shashank V., Leong Andrew F.T., Kinsey Alex H., Gibbins John D., Arlington Shane Q., Sun Tao, Fezzaa Kamel, Hufnagel Todd C., Weihs Timothy P., Viewing internal bubbling and microexplosions in combusting metal particles via x-ray phase contrast imaging, Combustion and Flame, 199, 2019. Crossref
-
Antonov D. V., Piskunov M. V., Strizhak P. A., Characteristics of the Child-Droplets Emerged by Micro-Explosion of the Heterogeneous Droplets Exposed to Conductive, Convective and Radiative Heating, Microgravity Science and Technology, 31, 5, 2019. Crossref
-
Tanimoto Daisuke, Shinjo Junji, Numerical simulation of secondary atomization of an emulsion fuel droplet due to puffing: Dynamics of wall interaction of a sessile droplet and comparison with a free droplet, Fuel, 252, 2019. Crossref
-
Nissar Z., Rybdylova O., Sazhin S.S., Heikal M., Aziz A.Rashid B.A., Ismael Mhadi A., A model for puffing/microexplosions in water/fuel emulsion droplets, International Journal of Heat and Mass Transfer, 149, 2020. Crossref
-
Antonov Dmitry V., Piskunov Maxim V., Strizhak Pavel A., Explosive disintegration of two-component drops under intense conductive, convective, and radiant heating, Applied Thermal Engineering, 152, 2019. Crossref
-
Luo Kun, Shao Changxiao, Chai Min, Fan Jianren, Level set method for atomization and evaporation simulations, Progress in Energy and Combustion Science, 73, 2019. Crossref
-
Antonov D.V., Fedorenko R.M., Kuznetsov G.V., Strizhak P.A., Modeling the micro-explosion of miscible and immiscible liquid droplets, Acta Astronautica, 171, 2020. Crossref
-
Chaitanya Kumar Rao D., Basu Saptarshi, Phenomenology of disruptive breakup mechanism of a levitated evaporating emulsion droplet, Experimental Thermal and Fluid Science, 115, 2020. Crossref
-
Sazhin Sergei S., Bar-Kohany Tali, Nissar Zuhaib, Antonov Dmitrii, Strizhak Pavel A., Rybdylova Oyuna D., A new approach to modelling micro-explosions in composite droplets, International Journal of Heat and Mass Transfer, 161, 2020. Crossref
-
Sazhin S, Shchepakina E, Sobolev V, Modelling of sprays: simple solutions of complex problems, Journal of Physics: Conference Series, 1368, 4, 2019. Crossref
-
Pavlenko Anatoliy M., Koshlak Hanna, Application of Thermal and Cavitation Effects for Heat and Mass Transfer Process Intensification in Multicomponent Liquid Media, Energies, 14, 23, 2021. Crossref
-
Sazhin S.S., Rybdylova O., Crua C., Heikal M., Ismael M.A., Nissar Z., Aziz A. Rashid B.A., A simple model for puffing/micro-explosions in water-fuel emulsion droplets, International Journal of Heat and Mass Transfer, 131, 2019. Crossref
-
Antonov D.V., Fedorenko R.M., Strizhak P.A., Nissar Z., Sazhin S.S., Puffing/micro-explosion in composite fuel/water droplets heated in flames, Combustion and Flame, 233, 2021. Crossref
-
Antonov D.V., Fedorenko R.M., Strizhak P.A., Castanet G., Sazhin S.S., Puffing/micro-explosion of two closely spaced composite droplets in tandem: Experimental results and modelling, International Journal of Heat and Mass Transfer, 176, 2021. Crossref
-
Shinjo Junji, Panwisawas Chinnapat, Digital materials design by thermal-fluid science for multi-metal additive manufacturing, Acta Materialia, 210, 2021. Crossref
-
Guida Paolo, Ceschin Alberto, Saxena Saumitra, Im Hong G., Roberts William L., A computational study of thermally induced secondary atomization in multicomponent droplets, Journal of Fluid Mechanics, 935, 2022. Crossref
-
Antonov D.V., Kuznetsov G.V., Fedorenko R.M., Strizhak P.A., Ratio of water/fuel concentration in a group of composite droplets on high-temperature heating, Applied Thermal Engineering, 206, 2022. Crossref
-
Madanikashani Sepehr, Vandewalle Laurien A., De Meester Steven, De Wilde Juray, Van Geem Kevin M., Multi-Scale Modeling of Plastic Waste Gasification: Opportunities and Challenges, Materials, 15, 12, 2022. Crossref
-
Sazhin Sergei S., Processes in Composite Droplets, in Droplets and Sprays: Simple Models of Complex Processes, 2022. Crossref
-
Antonov D.V., Volkov R.S., Fedorenko R.M., Strizhak P.A., Castanet G., Sazhin S.S., Temperature measurements in a string of three closely spaced droplets before the start of puffing/micro-explosion: Experimental results and modelling, International Journal of Heat and Mass Transfer, 181, 2021. Crossref
-
Castanet G., Antonov D.V., Strizhak P.A., Sazhin S.S., Effects of water subdroplet location on the start of puffing/micro-explosion in composite fuel-water droplets, International Journal of Heat and Mass Transfer, 186, 2022. Crossref
-
Sazhin S.S., Shchepakina E., Sobolev V.A., Antonov D.V., Strizhak P.A., Puffing/micro-explosion in composite multi-component droplets, International Journal of Heat and Mass Transfer, 184, 2022. Crossref
-
Antonov D.V., Kuznetsov G.V., Strizhak P.A., The micro-explosive fragmentation criteria of two-liquid droplets, International Journal of Heat and Mass Transfer, 196, 2022. Crossref
-
Antonov Dmitrii V., Fedorenko Roman M., Strizhak Pavel A., Micro-Explosion Phenomenon: Conditions and Benefits, Energies, 15, 20, 2022. Crossref