International Journal of Energy for a Clean Environment
Publication de 8 numéros par an
ISSN Imprimer: 2150-3621
ISSN En ligne: 2150-363X
SJR:
0.597
SNIP:
1.456
CiteScore™::
3.7
H-Index:
18
Indexed in
NOx EMISSIONS AND COMBUSTIBILITY CHARACTERISTICS OF COAL BLENDS
Volume 6,
Numéro 1, 2005,
pp. 83-97
DOI: 10.1615/InterJEnerCleanEnv.v6.i1.70
RÉSUMÉ
A series of coals were blended and several aspects of the resultant blends were studied. This included determination of the grindability of the samples by means of the Hardgrove Grindability Index and temperature programmed combustion tests, which were carried out in a thermogravimetric analyzer coupled to a quadrupole mass spectrometer. Special attention was paid to the combustibility parameters and the NO emissions during blend combustion. It was found that while some coal blends present interaction between the individual coals, others do not. This behavior was assumed to be due to the differences in coal structure and functional groups composition.
383 Vues d'articles
24 Téléchargements d'articles
Métrique
Articles avec un contenu similaire:
Dernier numéro
Prochains articles
APPLICATION OF MICROBIAL FUEL CELL FOR CASSAVA FERMENTATION WASTEWATER TREATMENT
Experimental and regression analysis of C. I engine powered by diesel surrogate fuel from waste lubricating oil using microwave pyrolysis
PREFACE
Thermal analysis and Improvement of Municipal Solid Waste Syngas Combustion applied on Micro Gas Turbine
Numerical simulation of turbulent flow in a heat exchanger equipped with fins of different materials and geometries
Low-Cost Photovoltaic Emulator With a High-Dynamic Response for Small Satellite Applications
Collection efficiency analysis and structure optimization of fugitive fumes from aluminum electrolysis based on multi-field coupling
Transient Analysis of Liquid Hydrogen Transfer in Cryogenic Storage Tanks
Pure Ammonia Combustion in a Bidirectional Swirling Flow
CFD modeling of the combustion of Ukrainian coal and biomass in a flare boiler unit TPP-210a
An Experimental Study of the Cooling Efficiency on Curved Surfaces with Different Shaped Holes
Employing Granulated Bimetallic Nanocomposite of Ni/Cu@CuMOF Nanocomposite in Steam Reforming of Methanol Process for Hydrogen Production
INVESTIGATION THE PERFORMANCE OF AN EVACUATED TUBE SOLAR COLLECTOR FILLED WITH AL2O3/WATER NANOFLUID UNDER THE CLIMATE CONDITIONS OF AL-HILLA(IRAQ)
The effect of carbonization temperature on the properties of carbonaceous material obtained from ethylene-propylene-diene-monomer (EPDM) wastes
THE SOCIAL COST OF CARBON EVALUATION BASED ON CARBON CAPTURE AND STORAGE TECHNOLOGIES FOR POWER GENERATION PLANTS