Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.9

ISSN Imprimer: 2152-5102
ISSN En ligne: 2152-5110

Volumes:
Volume 47, 2020 Volume 46, 2019 Volume 45, 2018 Volume 44, 2017 Volume 43, 2016 Volume 42, 2015 Volume 41, 2014 Volume 40, 2013 Volume 39, 2012 Volume 38, 2011 Volume 37, 2010 Volume 36, 2009 Volume 35, 2008 Volume 34, 2007 Volume 33, 2006 Volume 32, 2005 Volume 31, 2004 Volume 30, 2003 Volume 29, 2002 Volume 28, 2001 Volume 27, 2000 Volume 26, 1999 Volume 25, 1998 Volume 24, 1997 Volume 23, 1996 Volume 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v24.i4-6.180
pages 623-632

Metal Solidification during Spray Forming

Udo Fritsching
Department of Particles and Process Engineering, University of Bremen; Foundation Institute of Materials Science, Badgasteiner Str. 3, D-28359 Bremen, Germany
D. Bergmann
Chemical Engineering Department, University Bremen, Germany
Klaus Bauckhage
Chemical Engineering Department, University of Bremen, Bremen, Germany

RÉSUMÉ

An essential feature of the spray forming process for the production of near net shaped metal products is a suitable composition of the spray cone prior to impingement onto the substrate or deposit. Excellent product qualities and homogeneities need a mixture of particles in different stages of their individual solidification. Modeling of phase change behavior of metal melts is an important part of an overall thermal modeling of the process. Control of the solidification process is one of the key issues in spray forming research. The thermal history of a metal element from superheating (in advance of the atomization process) via solidification and cooling to room temperature has significant influence on the resulting material properties of the product. Dependent on the alloy composition, individual solidification models must be derived. This contribution describes the droplet solidification in flight in the spray cone and further on in the resulting deposit during spray forming for a steel alloy. For the simulation of the spray cone behavior, a multiphase flow model is established including momentum and thermal coupling. The description of the transient thermal conditions in the sprayed deposit, including necessary boundary conditions, is derived in a general coordinate based heat conduction algorithm.


Articles with similar content:

THERMAL STRESS ANALYSIS IN DIRECT CHILL CASTING OF MAGNESIUM-ALLOYS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Jeevan Jaidi, Pavan Kumar Penumakala, P. V. Sai Divya
NUMERICAL INVESTIGATION OF MICROPORE FORMATION DURING SUBSTRATE IMPACT OF MOLTEN DROPLETS IN PLASMA SPRAY PROCESSES
Atomization and Sprays, Vol.4, 1994, issue 4
Roger H. Rangel, Enrique J. Lavernia, Huimin Liu
RAPID SOLIDIFICATION: FUNDAMENTALS AND MODELING
Annual Review of Heat Transfer, Vol.11, 2000, issue 11
Guo-Xiang Wang, Vish Prasad
PLASMA SPRAYING OF BORON CARBIDE USING TERNARY GAS MIXTURES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.14, 2010, issue 4
Michel Vardelle, Erick Meillot, S. Janisson, Pierre Fauchais, Armelle Vardelle
Unsteady Vapor-Drop Jet in Rarefied Space
International Journal of Fluid Mechanics Research, Vol.22, 1995, issue 3-4
Z. M. Malikov, Al'bert Leonidovich Stasenko