Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.9

ISSN Imprimer: 2152-5102
ISSN En ligne: 2152-5110

Volumes:
Volume 47, 2020 Volume 46, 2019 Volume 45, 2018 Volume 44, 2017 Volume 43, 2016 Volume 42, 2015 Volume 41, 2014 Volume 40, 2013 Volume 39, 2012 Volume 38, 2011 Volume 37, 2010 Volume 36, 2009 Volume 35, 2008 Volume 34, 2007 Volume 33, 2006 Volume 32, 2005 Volume 31, 2004 Volume 30, 2003 Volume 29, 2002 Volume 28, 2001 Volume 27, 2000 Volume 26, 1999 Volume 25, 1998 Volume 24, 1997 Volume 23, 1996 Volume 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v24.i1-3.290
pages 294-306

Control of Transient Injection and Fast Spray Dynamics

M. Ismailov
Department of Mechanical System Engineering, Gunma University, 1-5-1, Tenjin, Kiryu, 376 Japan
Tsuneaki Ishima
Department of Mechanical System Engineering, Gunma University, 1-5-1, Tenjin, Kiryu, 376 Japan
T. Obokata
Department of Mechanical System Engineering, Gunma University, 1-5-1, Tenjin, Kiryu, 376 Japan
M. Tsukagoshi
Unisia Jecs Co., 1671-1, Kasukawa, Isesaki, 372 Japan
K. Kobayashi
Unisia Jecs Co., 1671-1, Kasukawa, Isesaki, 372 Japan

RÉSUMÉ

The present paper describes available operational sources to control the instantaneous fuel flow rate driven by injection system at the high frequencies, 25 and 50 Hz, with main focus to the fast transient phases. The influence of outflow nozzle diameter ranged from 100 to 500 μm on the pipe flow dynamics has been investigated. It was experimentally observed that instantaneous flow rate can be actively controlled by varying operation injection frequency and injection time within a cycling period. Aiming at the practical fuel injection control by using a pressure measurement the analysis of those data is introduced. Results of the PDA measurements in high pressure rig to validate a fuel spray formation in advanced direct injection system is also presented.


Articles with similar content:

STUDY OF TURBULENT REACTING FLOW IN A JET ENGINE COMBUSTOR USING LARGE-EDDY SIMULATION
TSFP DIGITAL LIBRARY ONLINE, Vol.6, 2009, issue
Donghyun You, Parviz Moin, Frank Ham
LARGE-SCALE VORTICAL MOTION AND COMBUSTION NOISE CONTROL IN SWIRL-STABILIZED COMBUSTOR
TSFP DIGITAL LIBRARY ONLINE, Vol.6, 2009, issue
Mamoru Tanahashi, G.-M. Choi, Masayasu Shimura, Toshio Miyauchi
DYNAMIC CHARACTERISTICS OF HIGH-SPEED WATER JETS IN WATERJET CUTTING MACHINES
Journal of Flow Visualization and Image Processing, Vol.22, 2015, issue 4
Yaroslav N. Shirshov, N. N. Sysoev, Dmitry S. Naumov, D. A. Nersesyan, Irina A. Znamenskaya
EXPERIMENTAL STUDIES ON HIGH-PRESSURE SPRAY STRUCTURE OF BIOFUELS
Atomization and Sprays, Vol.21, 2011, issue 6
R. V. Ravikrishna, Devendra Deshmukh
INFLUENCE OF PIEZO-DRIVEN SYNTHETIC JET ON WATER SPRAY BEHAVIOR
Atomization and Sprays, Vol.27, 2017, issue 8
Matteo Chiatto, Luca Marchitto, Luigi de Luca, G. Valentino