Publication de 4 numéros par an
ISSN Imprimer: 2169-2785
ISSN En ligne: 2167-857X
Indexed in
THE USE OF MOLYBDENUM ACTIVATOR FOR DEPOSITION OF FLUOROPOLYMER COATINGS WITH DIFFERENT STRUCTURES BY THE HOT WIRE CHEMICAL VAPOR DEPOSITION METHOD
RÉSUMÉ
The possibility of using a molybdenum activator in the deposition of a fluoropolymer coating with different surface structures by the hot wire chemical vapor deposition method is presented. The significant influence of the temperature of the molybdenum filament of the activator on the structure of the deposited fluoropolymer coating is established. The temperature limits of the molybdenum activator application in the deposition of fluoropolymer coatings are determined. A slight transfer of the material of the molybdenum filament of the activator with its oxidation into the fluoropolymer coating structure during the synthesis of the coating is established. It is found that the obtained fluoropolymer coatings have hydrophobic properties.
-
Adamson, A., The Physical Chemistry of Surfaces, New York: Wiley, 1976.
-
Boinovich, L.B. and Emelyanenko, A.M., Hydrophobic Materials and Coatings: Principles of Design, Properties and Applications, Russ. Chem. Rev., vol. 77, pp. 583-600, 2008.
-
Kobayashi, M., Sakashita, M., and Adachi, T., Morphology-Dependent Anomalous Frequency Shifts of Infrared Absorption Bands: Poly(Tetrafluoroethy1ene) and Its Linear Oligomers Perfluoroeicosane and Perfluorotetracosane, Macromolecules, vol. 28, pp. 316-324, 1995.
-
Lau, K.K.S., Mao, Y., Pryce Lewis, H.G., Murthy, S.K., Olsen, B.D., Loo, L.S., and Gleason, K.K., Polymeric Nanocoatings by Hot-Wire Chemical Vapor Deposition (HWCVD), Thin Solid Films, vol. 501, nos. 1-2, pp. 211-215, 2006.
-
Martos, M., Morales, J., and Sanchez, L., Mechanochemical Synthesis of Sn1-xMoXOx Anode Materials for Li-Ion Batteries, J. Mater. Chem., vol. 12, no. 10, pp. 2979-2984, 2002.
-
Mihaly, J., Sterkel, S., Ortner, H.M., Kocsis, L., Hajba, L., Furdyga, E., and Minka, J., FTIR and FT-Raman Spectroscopic Study on Polymer based High Pressure Digestion Vessels, Croat. Chem. Acta, vol. 79, no. 3, pp. 497-501, 2006.
-
Miljkovic, N., Enright, R., Nam, Y., Lopez, K., Dou, N., Sack, J., and Wang, E., Jumping-Droplet-Enhanced Condensation on Scalable Superhydrophobic Nanostructured Surfaces, Nano Lett., vol. 13, pp. 179-187, 2013.
-
Rebrov, A.K., Safonov, A.I., and Timoshenko, N.I., Depositing Films from a Supersonic Jet of Tetrafluoroethylene Activated by Interaction with a Hot Wire Obstacle, Tech. Phys. Lett., vol. 35, no. 5, pp. 395-396, 2009.
-
Safonov, A.I., Sulyaeva, V.S., Gatapova, E.Ya., Starinskiy, S.V., Timoshenko, N.I., and Kabov, O.A., Deposition Features and Wettability Behavior of Fluoropolymer Coatings from Hexafluoropropylene Oxide Activated by NiCr Wire, Thin Solid Films, vol. 653, pp. 165-172,2018.
-
Seguin, L., Figlarz, M., Cavagnat, R., and Lassegues, J.-C., Infrared and Raman Spectra of MoO3 Molybdenum Trioxides and MoO3xH2O Molybdenum Trioxide Hydrates, Spectrochim. Acta, Part A, vol. 51, no. 8, pp. 1323-1344,1995.
-
Surtaev, A.S., Serdyukov, V.S., and Pavlenko, A.N., Nanotechnologies for Thermophysics: Heat Transfer and Crisis Phenomena at Boiling, Nanotechnol. Russ., vol. 11, nos. 11-12, pp. 696-715, 2016.
-
Timoshenko, N.I., Sulyaeva, V.S., Bogoslovtseva, A.L., Gatapova, E.Y., and Safonov, A.I., Influence of Catalyst Material on Growth Rate and Morphology of Fluoropolymer Coating Deposited by Hot Wire CVD, J. Phys. Conf. Ser., vol. 1105, p. 012125(4), 2018. DOI: 10.1088/1742-6596/1105/1/012125.
-
Xue, C.-H., Jia, S.-T., Zhang, J., and Ma, J.-Z., Large-Area Fabrication of Superhydrophobic Surfaces for Practical Applications: An Overview, Sci. Technol. Adv. Mater., vol. 11, p. 033002(15), 2010.
-
Yasuoka, H., Yoshida, M., Sugita, K., Ohdaira, K., Murata, H., and Matsumura, H., Fabrication of PTFE Thin Films by Dual Catalytic Chemical Vapor Deposition Method, Thin Solid Films, vol. 516, no. 5, pp. 687-690, 2008.