Abonnement à la biblothèque: Guest
Page d'accueil ICHMT DL Année en cours Archives Comité de direction Centre international pour le transfert de chaleur et de masse


DOI: 10.1615/ICHMT.2000.TherSieProcVol2TherSieProcVol1.330
pages 247-251

Franc Cimerman
Plinovodi d.o.o., Cesta Ljubljanske Brigade 11b, 1001 Ljubljana, Slovenia

Bogdan Blagojevic
Laboratory of Measurement in Process Engineering, Faculty of Mechanical Engineering Ljubljana, Aškerceva 6, Ljubljana, Slovenia

Ivan Bajsic
Laboratory of Measurements in Process Engineering, Faculty of Mechanical Engineering, Askerceva 6, Ljubljana, Slovenia


This paper presents an analysis of the influences of natural gas and mixed gas on the frequency characteristics of contact temperature sensors in dynamic processes, in which temperature is one of the characteristic parameters for the control and regulation of dynamic processes. The analysis was performed with regard to the frequency characteristics of the above-mentioned type of temperature sensors in dynamic processes with air, which is the most commonly used gas in dynamic experimental devices. For this reason, identification of the frequency characteristics of contact temperature sensors and testing of the dynamic characteristics of such sensors were performed in an experimental device containing air.
The frequency characteristics of the tested temperature sensors in natural and mixed gas were calculated using a computational calibration model. The obtained results allow us to analyse and compare the dynamic properties of temperature sensors which are very important for system control and regulation. Because supply systems involve real gas under different pressure and velocity conditions such dynamic properties of temperature sensors could not be determined experimentally, and the method used seems to be the best procedure for evaluation.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH