Abonnement à la biblothèque: Guest
Page d'accueil ICHMT DL Année en cours Archives Comité de direction Centre international pour le transfert de chaleur et de masse

Forced convection
NUMERICAL SIMULATION OF TRANSIENT COOLING EFFECT WITH WALL MASS INJECTION BEHIND THE BACKSTEP

Yue-Tzu Yang
Department of Mechanical Engineering, National Cheng Kung University, Tainan, 701, Taiwan

Kuo-Teng Tsai
Department of Mechanical Engineering, National Cheng Kung University, Tainan, 701, Taiwan

Résumé

This study presents the numerical simulation of a transient mixing process of the high temperature turbulent flow behind a backstep with a low temperature wall mass injection, and compares with the experimental results by Yang et al. [16]. The turbulent governing equations are solved using a Control-Volume-based Finite-Difference Method with power-law scheme. The well-known k − ε turbulence model and its associated wall functions are used to describe the turbulent structure. The velocity and pressure terms of the momentum equations are solved by the SIMPLE (Semi-Implicit Method for Pressure-Linked Equation) method. Orthogonal non-uniform staggered grids are used for the establishment of mesh grids.
The parameters studied include inlet velocity (U0 = 10, 20 and 30 m/s), inlet temperature (T0 = 150, 200 and 300 °C), and the wall injection rate (Q = 0.15, 0.25 and 0.35 m3/min). Heat transfer and temperature have been analyzed for steady and unsteady state with a constant height of the step. The numerical calculations on the flow field indicate that the reattachment length Xr becomes shorter as the wall injection rate increases. The error of the reattachment length is about 7%∼10% compared with the experimental results of Yang et al. [16]. In the recirculation zone, the horizontal velocity is decreased whereas the vertical velocity is increased with a uniform wall injection. The turbulent characteristics show that the maximum turbulent intensity and Reynolds stress on any section happens near the shear layer or the larger gradient of the velocity. In the recirculation zone, the turbulent intensity decreases as the wall injection increases. Downstream of the reattachment point, the turbulent intensity increases as the wall injection increases.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH