Library Subscription: Guest
Begell Digital Portal Begell Digital Library eBooks Journals References & Proceedings Research Collections
Nanoscience and Technology: An International Journal
ESCI SJR: 0.219 SNIP: 0.484 CiteScore™: 0.37

ISSN Print: 2572-4258
ISSN Online: 2572-4266

Nanoscience and Technology: An International Journal

Formerly Known as Nanomechanics Science and Technology: An International Journal

DOI: 10.1615/NanomechanicsSciTechnolIntJ.v4.i1.30
pages 47-58

EFFECT OF THE NANOPARTICLES WITH VARIOUS STRUCTURES AND MORPHOLOGIES ON THE THERMO-MECHANICAL PROPERTIES OF EPOXY-BASED CARBON FIBER-REINFORCED PLASTICS

E. S. Molchanov
Moscow Aviation Institute (National Research University), Moscow, Russia
V. E. Yudin
Institute of the Macromolecular Compounds, RAS, Saint-Petersburg, Russia
Kamila Kydralieva
Moscow Aviation Institute (National Research University), 4 Volokolamskoe Highway, Moscow, 125993, Russia
V. Yu. Elokhovsky
Institute of the Macromolecular Compounds, RAS, Saint-Petersburg, Russia
G. V. Vaganov
Institute of the Macromolecular Compounds, RAS, Saint-Petersburg, Russia
E. M. Ivankova
Institute of the Macromolecular Compounds, RAS, Saint-Petersburg, Russia

ABSTRACT

This study is devoted to investigations of effects of nanoparticles with various structures and morphologies on mechanical properties of carbon fiber-reinforced plastics based on epoxy-powder compositions. The electrostatic spraying of the epoxy composition on the carbon fabric, followed by its calendering and pressing, allowed one to produce nanomodified carbon fiber-reinforced plastics and determe their mechanical properties: interlayer destruction viscosity, bending strength, dynamic modulus of elasticity in shear, and dynamic modulus of elasticity in bending. It is demonstrated that the structure and morphology of nanoparticles introduced into the polymer matrix substantially affect these characteristics of the carbon fiber-reinforced plastics.


Articles with similar content:

SYSTEMATIC STUDY OF STRUCTURAL AND CONDUCTIVE PROPERTIES OF COPPER NANOTUBES MODIFIED BY IONIZING RADIATION
Nanoscience and Technology: An International Journal, Vol.9, 2018, issue 2
I. Kenzhina, M. Kaikanov, M. Zdorovets, A. V. Tikhonov, Artem Kozlovskiy
A COMPARATIVE STUDY OF THE MECHANICAL PROPERTIES OF GLASS−POLYESTER COMPOSITES FILLED WITH INDUSTRIAL WASTES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.5, 2014, issue 4
Arun Kumar Rout, Subhrajit Ray
HIGH-ENERGY BALL MILLING OF Al–Cu–Fe QUASICRYSTAL-REINFORCED COMPOSITE POWDERS BASED ON POLYPHENYLENE SULFIDE
Composites: Mechanics, Computations, Applications: An International Journal, Vol.9, 2018, issue 2
Victor V. Tcherdyntsev, L. K. Olifirov, S. D. Kaloshkin, A. A. Stepashkin, Dilyus I. Chukov
MODELING OF FIBER WHISKERIZATION IMPACT ON THE RESIDUAL STRESS−STRAIN STATE OF LAYERED COMPOSITES
Nanoscience and Technology: An International Journal, Vol.5, 2014, issue 3
D. Q. Nguen, Yury O. Solyaev, A. V. Afanasiev, A. A. Dudchenko
MECHANICAL PROPERTIES AND MICROSTRUCTURE OF STAINLESS STEEL MANUFACTURED BY SELECTIVE LASER SINTERING
Nanoscience and Technology: An International Journal, Vol.8, 2017, issue 4
M. V. Prokofiev, A. V. Babaytsev, Lev N. Rabinskiy