Journal of Enhanced Heat Transfer
Published 8 issues per year
ISSN Print: 1065-5131
ISSN Online: 1563-5074
IF:
2.3
5-Year IF:
1.8
Immediacy Index:
0.2
Eigenfactor:
0.00037
JCI:
0.6
SJR:
0.433
SNIP:
0.593
CiteScore™::
4.3
H-Index:
35
Indexed in
Volume 1, 1994 Issue 1
DOI: 10.1615/JEnhHeatTransf.v1.i1
The Influence of the Prandtl Number on the Thermal Performance of Tubes with the Separation and Reattachment Enhancement Mechanism
pp. 5-21
DOI: 10.1615/JEnhHeatTransf.v1.i1.20
A Validated Procedure for the Prediction of Fully-Developed Nusselt Numbers and Friction Factors in Pipes with 3-Dimensional Roughness
pp. 23-35
DOI: 10.1615/JEnhHeatTransf.v1.i1.30
Augmented Heat Transfer in Square Channels with Wedge-Shaped and Delta-Shaped Turbulence Promoters
pp. 37-52
DOI: 10.1615/JEnhHeatTransf.v1.i1.40
Influence of Roughness Shape and Spacing on the Performance of Three-Dimensional Helically Dimpled Tubes
pp. 53-64
DOI: 10.1615/JEnhHeatTransf.v1.i1.50
Effect of Particle Size and Size Distribution on Particulate Fouling in Enhanced Tubes
pp. 65-75
DOI: 10.1615/JEnhHeatTransf.v1.i1.60
Pure Vapour Condensation of Refrigerants 11 and 113 on a Horizontal Integral Finned Tube at High Vapour Velocity
pp. 77-86
DOI: 10.1615/JEnhHeatTransf.v1.i1.70
A Model of Enhancement of Vapor Absorption in a Liquid Pool with Mass Transfer Additives
pp. 87-97
DOI: 10.1615/JEnhHeatTransf.v1.i1.80
Saturated Pool Boiling Enhancement by Means of an Electric Field
pp. 99-114
DOI: 10.1615/JEnhHeatTransf.v1.i1.90
Simulation of Electrohydrodynamic Enhancement of Laminar Flow Heat Transfer
pp. 115-126
DOI: 10.1615/JEnhHeatTransf.v1.i1.100
Latest Issue
EXPERIMENTAL AND THEORETICAL CHARACTERIZATION OF TWO-PHASE FLOW DISTRIBUTION IN UNBALANCED FLOW NETWORKS
FIELD EXPERIMENTAL INVESTIGATION OF THE INSULATION DETERIORATION CHARACTERISTICS OF OVERHEAD PIPELINE FOR STEAM HEATING NETWORK
FLOW AND HEAT-TRANSFER CHARACTERISTICS IN SMALL-DIAMETER TUBE BUNDLES WITH A STAGGERED LAYOUT: AN EXPERIMENTAL STUDY
POOL BOILING HEAT TRANSFER CHARACTERISTICS OF POROUS NICKEL MICROSTRUCTURE SURFACES
Forthcoming Articles
Enhancement Evaluation Criteria for Pool Boiling Enhancement Structures in Electronics Cooling: CHF Enhancement Ratio (ER-CHF) and Enhancement Index (EI)
Influence of transient heat pulse on heat transfer performance of vapor chamber with different filling ratios
Effect of Geometrical Parameters on the Thermal-Hydraulic Performance of Internal Helically Ribbed Tubes
Condensation heat transfer in smooth and three-dimensional dimpled tubes of various materials
In Memoriam of Professor Ralph L. Webb on the anniversary of his 90th birthday
Analysis of the Single-Blow Transient Testing Technique for Non-metallic Heat Exchangers
Evaluation of Heat Transfer Rate of Double-Layered Heat Sink Cooling System with High Energy Dissipation
Experimental Investigation on Behavior of a Diesel Engine with Energy, Exergy, and Sustainability Analysis Using Titanium Oxide (Tio2) Blended Diesel and Biodiesel
COLLISION MORPHOLOGIES OF SUPERCOOLED WATER DROPLETS ON SMALL LOW-TEMPERATURE SUPERHYDROPHOBIC SPHERICAL TARGETS
Pool boiling heat transfer characteristics of porous nickel microstructure surfaces
Field experimental investigation of the insulation deterioration characteristics of overhead pipeline for steam heating network
A parametric and comparative study on bare-tube banks and new-cam-shaped tube banks for waste heat recovery applications