Journal of Enhanced Heat Transfer
Published 8 issues per year
ISSN Print: 1065-5131
ISSN Online: 1563-5074
IF:
2.3
5-Year IF:
1.8
Immediacy Index:
0.2
Eigenfactor:
0.00037
JCI:
0.6
SJR:
0.433
SNIP:
0.593
CiteScore™::
4.3
H-Index:
35
Indexed in
Thermal Estimation of Matrix Heat Exchangers
Volume 2,
Issue 1-2, 1995,
pp. 33-41
DOI: 10.1615/JEnhHeatTransf.v2.i1-2.50
ABSTRACT
This paper characterizes perforated plates or wire screens consisting matrix heat exchangers (MHE) by porous media and treats them as heterogeneous systems because of the fact that apparent heat conductivities of matrices perpendicular to and parallel to the flow direction are different from each other. This paper presents two-phase and one-phase two-dimensional models to describe stationary heat transfer processes in MHE. Based on the one-phase model, an analytical solution is developed for the temperature distribution in MHE with parallel flow arrangement.
416 Article views
14 Article downloads
Metrics
Articles with similar content:
Latest Issue
EXPERIMENTAL AND THEORETICAL CHARACTERIZATION OF TWO-PHASE FLOW DISTRIBUTION IN UNBALANCED FLOW NETWORKS
FIELD EXPERIMENTAL INVESTIGATION OF THE INSULATION DETERIORATION CHARACTERISTICS OF OVERHEAD PIPELINE FOR STEAM HEATING NETWORK
FLOW AND HEAT-TRANSFER CHARACTERISTICS IN SMALL-DIAMETER TUBE BUNDLES WITH A STAGGERED LAYOUT: AN EXPERIMENTAL STUDY
A PARAMETRIC AND COMPARATIVE STUDY ON BARE-TUBE BANKS AND NEW CAM-SHAPED TUBE BANKS FOR WASTE HEAT RECOVERY APPLICATIONS
POOL BOILING HEAT TRANSFER CHARACTERISTICS OF POROUS NICKEL MICROSTRUCTURE SURFACES
Forthcoming Articles
Flow Boiling Heat Transfer in Microchannel Heat Exchangers with Micro Porous Coating Surface
Enhancement Evaluation Criteria for Pool Boiling Enhancement Structures in Electronics Cooling: CHF Enhancement Ratio (ER-CHF) and Enhancement Index (EI)
Influence of transient heat pulse on heat transfer performance of vapor chamber with different filling ratios
Effect of Geometrical Parameters on the Thermal-Hydraulic Performance of Internal Helically Ribbed Tubes
Condensation heat transfer in smooth and three-dimensional dimpled tubes of various materials
In Memoriam of Professor Ralph L. Webb on the anniversary of his 90th birthday
Analysis of the Single-Blow Transient Testing Technique for Non-metallic Heat Exchangers
Evaluation of Heat Transfer Rate of Double-Layered Heat Sink Cooling System with High Energy Dissipation
Experimental Investigation on Behavior of a Diesel Engine with Energy, Exergy, and Sustainability Analysis Using Titanium Oxide (Tio2) Blended Diesel and Biodiesel
COLLISION MORPHOLOGIES OF SUPERCOOLED WATER DROPLETS ON SMALL LOW-TEMPERATURE SUPERHYDROPHOBIC SPHERICAL TARGETS
Pool boiling heat transfer characteristics of porous nickel microstructure surfaces
Field experimental investigation of the insulation deterioration characteristics of overhead pipeline for steam heating network
A parametric and comparative study on bare-tube banks and new-cam-shaped tube banks for waste heat recovery applications