Library Subscription: Guest
Begell Digital Portal Begell Digital Library eBooks Journals References & Proceedings Research Collections
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.19 SNIP: 0.341 CiteScore™: 0.43

ISSN Print: 1093-3611
ISSN Online: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v5.i1.60
6 pages

ELECTROARC DISCHARGE IN CONDITIONS BOW-CONTACT CUTTING OF METAL

V. Frolov
SPb State Polytechnical University, 29 Polytechnicheskaya Str., 195251 Saint-Petersburg, Russia

ABSTRACT

In this work was investigated the formation of an electric arc. The cutting of metal detail was carried out in fluid by the rotaried disk. As a result were determined the modes of polar effect for a material melting and value of a Current density in an anode spot of an electric arc. It was made for the range of currents I=500−5000 A. The calculation procedure of an expanding plasma cavity in water was developed. The basic parameters of plasma in the presence of material evaporation were determined. The geometrical sizes of expanding gas cavity, and also cavity pressure depending on parameters of electrical arc dischaige were determined.
Regarding operating variables of installation were made the recommendations which based on conditions of an electric arc initiation and duration of an arc burning. It allows to ensure heightened productivity and efficiency of installation, and also to determine the main regularities of electrophysical and electro-hydrodynamical processes which influencing Lo the service properties of equipment.


Articles with similar content:

ELECTROARC DISCHARGE IN CONDITIONS BOW-CONTACT CUTTING OF METAL
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
V. Frolov
MAIN GUIDELINES FOR PRODUCING HIGH NITROGEN STEELS USING THERMAL PLASMA
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Jerzy Siwka
2.5-TONS PLASMA-INDUCTION FURNACE EQUIPPED WITH HOLLOW GRAPHITE ELECTRODE
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Mihail K. Mihovsky, Biserka I. Lucheva, Tzonio P. Tzonev , Kr.P. Blagoeva
GEOMETRIC PARAMETERS INFLUENCE ON VORTEX D.C. PLASMA TORCH WORKING CHARACTERISTICS
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
Pavle B. Pavlovic, S.Dj. Sikmanovic, Dejan B. Cvetinovic, Predrag Lj. Stefanovic
CONTROLLED ATOMIZATION OF VISCOUS NON-SINGLE-PHASE MEDIA
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
A. Karpov, L. Sergeyeva