Impact factor: 0.189
ISSN Print: 1093-3611
You have access to:Volume 16, 2012 Volume 15, 2011 Volume 14, 2010 Volume 13, 2009 Volume 12, 2008 Volume 11, 2007 Volume 10, 2006 Volume 9, 2005 Volume 8, 2004 Volume 7, 2003 Volume 6, 2002 Volume 5, 2001 Volume 4, 2000 Volume 3, 1999 Volume 2, 1998 Volume 1, 1997
High Temperature Material Processes (An International Quarterly of High-Technology Plasma Processes)
ELECTRICAL CONDUCTIVITY OF THE ACETAMIDE-ACETATE SALT MELTS
Specific conductivity of molten mixtures of acetamide with following acetate salts was measured at 83 ± 0.1°С : a) acetamide - anhydrous sodium acetate (up to 0.051 mole fraction), b) acetamide - sodium acetate trihydrate (entire concentration range) and c) acetamide - zinc acetate dihydrate ( up to 0.24 mole fraction). Selected composition of all three mixtures, with low melting points were chosen for the studies of the changes of conductance with temperature. The mixtures with sodium acetate both anhydrous and hydrated showed fairly high specific conductivity (»10-2 S/cm), nearly two orders of magnitude higher than the mixture with hydrated zinc acetate. Molar conductivity was also calculated. The results were discussed in terms of acetamide-salt-water interactions. Attempts were made to calculate the degree of dissociation of the salts in molten acetamide. The results were compared with the data obtained from earlier thermochemical studies of the same melt systems.
|Home||Begell Digital Library||eBooks||Journals||References & Proceedings||Research Collections|