High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Published 4 issues per year
ISSN Print: 1093-3611
ISSN Online: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
CALCULATION OF THE ELECTROSTATIC FIELD OF CORONA DISCHARGE IN THE POWDER COATING PROCESS
Volume 22,
Issue 4, 2018,
pp. 231-238
DOI: 10.1615/HighTempMatProc.2018029210
ABSTRACT
The paper presents the results of calculation of the electric field in electrostatic powder coating with a corona spray gun. The object of the study is the process of charging a polydisperse powder–gas mixture in the electrostatic field of corona discharge. Numerical simulation was performed by the finite element method. The results of calculations of the electrostatic field with and without space charges are presented.
KEY WORDS: corona discharge, powder coating, powder spray gun, electrostatic field, particle charging
CITED BY
-
Fazlyyyakhmatov Marsel, Shaidullin Linar, Airflow velocity measurement of the electrostatic spray gun, Journal of Physics: Conference Series, 1588, 1, 2020. Crossref
757 Article views
21 Article downloads
Metrics
Articles with similar content:
Latest Issue
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Forthcoming Articles
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products