High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Published 4 issues per year
ISSN Print: 1093-3611
ISSN Online: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
ELECTRON−ION-PLASMA METHODS OF ALLOYING STEEL BY COPPER
Volume 19,
Issue 3-4, 2015,
pp. 319-334
DOI: 10.1615/HighTempMatProc.2016016725
ABSTRACT
This work presents the results obtained in investigating the structure, mechanical and tribological properties of steel subjected to electron−ion-plasma alloying by copper. Combined modes of treatment have been revealed allowing one to multiply increase in the hardness and wear resistance of a modified material. The physical reasons for the phenomenon have been determined.
KEY WORDS: modeling of temperature field, electrospark alloying, surface alloy, high-speed melting, electroexplosive alloying, electron beam
CITED BY
-
Devyatkov V.N., Ivanov Yu. F., Krysina O.V., Koval N.N., Petrikova E.A., Shugurov V.V., Equipment and processes of vacuum electron-ion plasma surface engineering, Vacuum, 143, 2017. Crossref
500 Article views
11 Article downloads
Metrics
Articles with similar content:
Latest Issue
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Forthcoming Articles
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products