Multiphase Science and Technology
Published 4 issues per year
ISSN Print: 0276-1459
ISSN Online: 1943-6181
SJR:
0.144
SNIP:
0.256
CiteScore™::
1.1
H-Index:
24
Indexed in
TEST-CASE NO 12: FILLING OF A CUBIC MOULD BY A VISCOUS JET (PN, PE)
Volume 16,
Issue 1-3, 2004,
pp. 83-86
DOI: 10.1615/MultScienTechn.v16.i1-3.130
ABSTRACT
A cubic cavity initially full of air is filled with a viscous fluid through a circular injector centered on the upper boundary of the cavity. During the injection the jet is unstable. Two-dimensional or three-dimensional oscillations may appear depending on the injection conditions. The numerical results may be compared with analytical and experimental results of the literature.
319 Article views
6 Article downloads
Metrics
Articles with similar content:
Latest Issue
PARAMETRIC STUDY AND DEVELOPMENT OF A CORRELATION FOR NUSSELT NUMBER IN NANOFLUID JET IMPINGEMENT
NUMERICAL ANALYSIS FOR EFFECTS OF GRID SPACER VANE ON FLOW-THERMAL CHARACTERISTICS OF TWO PHASE FLOW IN A 5 × 5 ROD BUNDLE
WELL-BALANCED ALGORITHM AND HEIGHT FUNCTION METHOD FOR DYNAMIC CONTACT ANGLE IN TWO-PHASE SYSTEMS
ASSESSMENT OF CLASSIC MULTIPHASE FLOW MODELS IN SHALE GAS WELLS