Library Subscription: Guest
Begell Digital Portal Begell Digital Library eBooks Journals References & Proceedings Research Collections
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.9

ISSN Print: 2152-5102
ISSN Online: 2152-5110

Volumes:
Volume 47, 2020 Volume 46, 2019 Volume 45, 2018 Volume 44, 2017 Volume 43, 2016 Volume 42, 2015 Volume 41, 2014 Volume 40, 2013 Volume 39, 2012 Volume 38, 2011 Volume 37, 2010 Volume 36, 2009 Volume 35, 2008 Volume 34, 2007 Volume 33, 2006 Volume 32, 2005 Volume 31, 2004 Volume 30, 2003 Volume 29, 2002 Volume 28, 2001 Volume 27, 2000 Volume 26, 1999 Volume 25, 1998 Volume 24, 1997 Volume 23, 1996 Volume 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v42.i1.60
pages 82-94

Experimental Study Resistances of Asymmetrical Pentamaran Model with Separation and Staggered Hull Variation of Inner Side-Hulls

Yanuar
Department of Mechanical Engineering, University of Indonesia Jakarta, Indonesia
Gunawan
Department of Mechanical Engineering, University of Indonesia, Jakarta 16424, Indonesia
Kurniawan T. Waskito
Department of Mechanical Engineering, University of Indonesia Jakarta, Indonesia
A. Jamaluddin
Indonesian Hydrodynamic Laboratory Surabaya, Indonesia

ABSTRACT

Application of multi-hull ships as marine transportation began to grow rapidly at the present. Advantages of pentamaran due to lower draught with the same displacement of monohull. This study aimed to determine the effect of variations in separation and staggered of inboard side hulls to the total resistances to get the configuration with the lowest resistance interference. Configuration varied by adjusting the separation and staggered of inner side hulls. Method of towing carriage experiments are used with variations of Froude number from 0.1 to 0.7. The highest drag reduction of Fr = 0.35 is II.a configuration (S/L = 3/16, R/L = 1/20) with a maximum percentage of 25%. The influence of the configuration to the resistances depends on the value of Fr, the influence of hull separation indicates the closer hull with the other gives a high interference resistance, while the influence of staggered hull indicates the position of inboard side hulls in optimal separation will give the lowest resistance in mid staggered positions.


Articles with similar content:

WHICH PARAMETER SHOULD BE USED IN EVALUATING NANOFLUID FLOWS: REYNOLDS NUMBER, VELOCITY, MASS FLOW RATE OR PUMPING POWER?
Heat Transfer Research, Vol.51, 2020, issue 5
Cuneyt Uysal
ASSESSING THE PERFORMANCE OF THREE DIFFERENT TYPE OF DIFFUSERS FOR A CENTRIFUGAL COMPRESSOR APPLICATIONS
3rd Thermal and Fluids Engineering Conference (TFEC), Vol.6, 2018, issue
Abraham E. Engeda, Mekuannint Messele
CONTROL OF VORTEX FLOW OVER A MANEUVERABLE AIRCRAFT MODEL USING NOSE FLAPS AT LARGE ANGLES OF ATTACK
TsAGI Science Journal, Vol.48, 2017, issue 8
Konstantin Anatolievich Osipov
NATURAL CONVECTION FROM A HORIZONTAL DISK OF SIMULATED MULTI-CHIP MODULES
International Heat Transfer Conference 11, Vol.8, 1998, issue
Y. R. Shieh , Y. H. Hung, C. J. Li
A Computational Study on the Physiologically Realistic Pulsatile Flow through an Eccentric Arterial Stenosis
International Journal of Fluid Mechanics Research, Vol.38, 2011, issue 3
A. K. M. Sadrul Islam, A.B.M. Toufique Hasan, Dipak Kanti Das