International Journal of Fluid Mechanics Research
Published 6 issues per year
ISSN Print: 2152-5102
ISSN Online: 2152-5110
IF:
1.1
5-Year IF:
1.3
Eigenfactor:
0.0002
JCI:
0.33
SJR:
0.256
SNIP:
0.49
CiteScore™::
2.4
H-Index:
23
Indexed in
Heat Transfer in Forced-Convection Film Boiling
Volume 22,
Issue 2, 1995,
pp. 66-72
DOI: 10.1615/InterJFluidMechRes.v22.i2.40
ABSTRACT
A mathematical model of the problem of forced-convection film boiling in tubes is developed and an approximate solution is obtained. Design equations for determining the heat transfer coefficients at supercritical heat flux densities in tube flows of subcooled and saturated water at p = 20 to 21.5 MPa, ρW = 1000 to 8000 kg/m2-sec, ΔT = 0 to 140 K, temperature of the inner surface of tube wall TW ≤ 800 K, and tube diameter d between 4 and 8 mm are presented.
270 Article views
14 Article downloads
Metrics
Articles with similar content:
Forthcoming Articles
A computational study for air-solid particles flow patterns in rib-roughened fluidized bed vessels
Offset coalescence behaviour of impacting low-surface tension droplet on high-surface-tension droplet
On Parametric Study of Fluid Leaves and Fluid Pineapple
Theoretical study of three-dimensional turbulent boundary layer over a rotating cone or disk
Methods of Turbulent Combustion Investigation: A Review Article
Flow structures in the wake region of an L-shaped cylinder and a triangular cylinder