International Journal of Fluid Mechanics Research
Published 6 issues per year
ISSN Print: 2152-5102
ISSN Online: 2152-5110
IF:
0.5
5-Year IF:
1.2
Eigenfactor:
0.0002
JCI:
0.22
SJR:
0.218
SNIP:
0.464
CiteScore™::
2
H-Index:
24
Indexed in
Volume 25, 1998 Issue 1-3
DOI: 10.1615/InterJFluidMechRes.v25.i1-3
Turbulent Transport of Momentum and Scalars in Swirling Flows with and without Combustion
pp. 1-13
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.10
Physical Properties and Heat Transfer in Tube Flows of Non-Newtonian Fluids
pp. 14-30
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.20
Numerical Simulation of Forced Convection Heat Transfer from an Ellipsoid of Revolution, Using a Fourier Spectral Method
pp. 31-40
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.30
Mixed Convection Heat Transfer of an Open Shallow Rectangular Cavity Packed with Spherical Particles
pp. 41-51
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.40
Spectrally Correlated Radiative Transfer in Real 3D Axisymmetrical Systems (The Sc. Art Code)
pp. 52-63
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.50
Turbulence Intensity in Fully Developed Turbulent Flow in an Eccentric Annulus
pp. 64-74
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.60
Time Evolution of Double-Diffusive Convection during Solidification of a Binary System
pp. 75-85
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.70
An Experimental Study of Forced Convective Boiling Heat Transfer of Refrigerants in a Rough Surface Tube
pp. 86-97
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.80
Intermittent Airblast Atomization and Spray Particle Mixing in Pulsating air Flow
pp. 98-110
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.90
Development of a Model for Turbulent Combustion within Porous Inert Media
pp. 111-122
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.100
Empirical Study on Heat Transfer in Pulse Burner
pp. 123-134
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.110
A New Averaging Technique for Multiphase, Turbulent, Reacting
pp. 135-143
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.120
Friction Factor and Heat Transfer Correlations for Gaseous Reactant Flow in Fuel Cell Power Modules
pp. 144-155
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.130
Advanced Optical Methods in Transient Heat Transfer and Two-Phase Flow
pp. 156-180
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.140
Mass Transport Effects on Coronary Flow and Left Ventricular Mechanics
pp. 181-188
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.150
Stability and Dynamics of Thin Heated Liquid Films
pp. 189-201
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.160
Effect of the Buoyancy Ratio on the Number of Double-Diffusive Cells in a Rectangular Enclosure
pp. 202-211
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.170
Rough-Wall Heat Transfer in Tbrbulent Boundary Layers
pp. 212-219
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.180
An Experimental Study for Combined Close-Contact and Natural Convection Melting in a Spherical Capsules
pp. 220-229
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.190
The Effect of a Spacer Grid Mixing Vane on the Critical Heat Flux for a Rod Bundle
pp. 230-242
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.200
An Analysis on Convective Heat Transfer of Film Boiling from a Finite-Size Horizontal Plate Facing Downward
pp. 243-254
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.210
Simulation of Turbulent Combustion and Heat Transfer in High Temperature Furnaces
pp. 255-265
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.220
Soot Formation in Premixed Constant-Volume Propane Combustion at Pressures up to 6 Mpa
pp. 266-275
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.230
Development of a High Load Submerged Combustion Burner
pp. 276-284
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.240
Mixed Convection in a Rectangular Duct Heated from below
pp. 285-294
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.250
Current Problems of Heat and Mass Transfer in the Cryopreservation of Biomaterials: Interactions among Coupled Multiscale Transport Processes
pp. 295-304
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.260
Spin-up Flows in a Rotating Cylindrical Container
pp. 305-313
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.270
Effect of Physical Properties Variation on Convective Heat Transfer
pp. 314-328
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.280
Convective Heat Transfer from a Heated Convex Cylinder with an Axisymmetric Backward-Facing Step
pp. 329-338
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.290
The Mixed Convection Flow of a Bingham Plastic in an Eccentric Annulus
pp. 339-350
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.300
A Bayesian Analysis of Steam Generator Tube Wall Emissivity for Heat Treatment
pp. 351-362
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.310
Heat Transfer to Low Prandtl Number Fluids in Turbulent Pipe Flow: a Simple but Accurate Application of Reynolds Analogy
pp. 363-375
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.320
Convection Dominated PCM Fusion around a Vertical Cylinder
pp. 376-385
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.330
Horizontal Nucleate Flow Boiling Heat Transfer Coefficient Measurements and Visual Observations for R12, R134a and R134a/Ester Lubricant Mixtures
pp. 386-399
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.340
Heat Transfer in Bubbly Liquids: Fundamentals and Waves
pp. 400-407
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.350
Mixing Time in a Gas-Particle Stirred Ladle with Throughflow
pp. 408-421
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.360
The Design and Testing of a Fluid Bed Incinerator which Will Be Used to Investigate the Burning of Waste Chemicals
pp. 422-429
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.370
Three-Dimensional Simulation of Reacting Flow in a Boiler
pp. 430-436
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.380
Reacting and Diffusive Continuum Mechanical Mixture Models Applied to Combustion
pp. 437-446
DOI: 10.1615/InterJFluidMechRes.v25.i1-3.390
Latest Issue
Forthcoming Articles
Influence of Grid Density and Rotation Model on Propeller Open Water CFD Simulation and Uncertainty
Investigation of Geometric Parameters on Flap and Slat Aerodynamics in a Three-Element Airfoil
Numerical Investigation on the Inflow Mach Number Variations in a Strut Injected Cavity Based Scramjet Combustors
Theoretical study of three-dimensional turbulent boundary layer over a rotating cone or disk
Methods of Turbulent Combustion Investigation: A Review Article
Flow structures in the wake region of an L-shaped cylinder and a triangular cylinder