RT Journal Article
ID 3fdc0eeb18bd1c6d
A1 Yang, Xu
A1 Zhou, Yarong
A1 Wang, Binglei
A1 Zhang, Bo
T1 A FINITE-ELEMENT METHOD OF FLEXOELECTRIC EFFECTS ON NANOSCALE BEAM
JF International Journal for Multiscale Computational Engineering
JO JMC
YR 2019
FD 2019-02-19
VO 17
IS 1
SP 29
OP 43
K1 flexoelectricity
K1 strain gradient elasticity theory
K1 FEM
K1 Euler-beam
AB Flexoelectricity is a linear coupling between the strain gradient and the electric polarization, which is present in all dielectric materials. Strain gradients cause flexoelectricity to be size-dependent, especially significant for nanoscale structures. However, strain gradients involve higher-order partial derivate of displacements which brings difficulties to the solution of flexoelectric problems. The effect of strain gradient elasticity was ignored in most previous works on
flexoelectricity. Thus, it is necessary to develop an effective numerical method that accounts for both strain gradient elasticity and flexoelectricity.We have developed a size-dependent finite-element model of a nanoscale Euler beam based on a reformulated strain gradient elasticity theory. The new model contains three independent material length scale parameters which capture the size effect. The developed C_{2} weak continuous element with two nodes has three degrees of freedom at each node. Using the Finite Element Method (FEM), with the Euler cantilever beam as an example, the effects of flexoelectricity and strain gradient elasticity on the beam have been investigated. The results were compared with those available in literature and an excellent agreement was achieved.
PB Begell House
LK http://dl.begellhouse.com/journals/61fd1b191cf7e96f,720e7e4f6a89dbb3,3fdc0eeb18bd1c6d.html