ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Nanoscience and Technology: An International Journal
ESCI SJR: 1.031 SNIP: 1.517 CiteScore™: 0.7

ISSN 印刷: 2572-4258
ISSN オンライン: 2572-4266

Nanoscience and Technology: An International Journal

Formerly Known as Nanomechanics Science and Technology: An International Journal

DOI: 10.1615/NanomechanicsSciTechnolIntJ.v6.i4.10
pages 251-260

MECHANICAL PROPERTIES OF CARBON FIBER-REINFORCED PLASTIC CONTAINING ADDITIONS OF FULLERENE SOOT

A. V. Artemiev
Moscow Aviation Institute (National Research University), 4 Volokolamskoe Shosse, Moscow, 125993, Russia
A. V. Afanasiev
Moscow Aviation Institute (National Research University), 4 Volokolamskoe Highway, Moscow, 125993, Russian Federation
Lev N. Rabinskiy
Department of Engineering Education, Moscow Aviation Institute (National Research University), 4 Volokolamskoe Highway, Moscow, 125993, Russian Federation
Jo Aung Lin
Moscow Aviation Institute (National Research University), 4 Volokolamskoe Highway, Moscow, 125993, Russian Federation

要約

The results of investigations of the microstructure and mechanical properties of carbon fiber-reinforced plastic with fullerene soot used as nanodispersed filler are presented. Samples of the composites with reinforcement scheme O2/9O4/O2, +452/−454/+452, O4, 904 were investigated. The strength and the modulus of elasticity of unidirectional samples and fillers with fiber orientation ±45 were improved by 5−20% after addition of 0.2% of the filler. The properties of composites with other fiber arrangements do not change, or may reduce to some extent. It was found that nanomodification of the binder insignificantly affected the material interlaminar shear strength and it is equal to 51 MPa. For the samples of unfilled matrix it was found the inpruvement of mechanical properties. Young modulus and ultimate tensile strength were increased by 25−30%.


Articles with similar content:

MECHANICAL PROPERTIES OF Si3N4-BASED COMPOSITE CERAMICS WITH NANOSIZED POROSITY
Nanoscience and Technology: An International Journal, Vol.8, 2017, issue 4
Yury Solyaev, Sergey A. Lurie, S. A. Sitnikov, Lev N. Rabinskiy, P. O. Polyakov
Stress and Strain Distribution Patterns in Bone around Splinted Standard and Short Implants Placed at the Crestal Level and Subcrestally using Three- Dimensional Finite Element Analysis
Journal of Long-Term Effects of Medical Implants, Vol.27, 2017, issue 1
Raheleh Akhavan Rasoolzadeh, Mahdi Kadkhodazadeh, Amir Mahmoudi Motlagh, Farshad Dehnavi, Reza Amid
MECHANICAL PROPERTIES AND MICROSTRUCTURE OF STAINLESS STEEL MANUFACTURED BY SELECTIVE LASER SINTERING
Nanoscience and Technology: An International Journal, Vol.8, 2017, issue 4
M. V. Prokofiev, A. V. Babaytsev, Lev N. Rabinskiy
PROPERTIES AND MICROSTRUCTURE OF AlSi10Mg SAMPLES OBTAINED BY SELECTIVE LASER MELTING
Nanoscience and Technology: An International Journal, Vol.11, 2020, issue 3
A. V. Babaytsev, Lev N. Rabinskiy, Alexander A. Orekhov
TRIBOMECHANICAL PERFORMANCE OF GLASS–EPOXY HYBRID COMPOSITES FILLED WITH MARBLE POWDER WITH THE TAGUCHI DESIGN AND ARTIFICIAL NEURAL NETWORK
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 1
Arun Kumar Rout, Subhrajit Ray, Ashok Kumar Sahoo