ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.142 SNIP: 0.16 CiteScore™: 0.29

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2018021842
pages 81-101

FUEL-RICH ALUMINUM−METAL FLUORIDE THERMITES

Siva Kumar Valluri
New Jersey Institute of Technology, Newark, New Jersey 07102, USA
Ian Monk
New Jersey Institute of Technology, Newark, New Jersey 07102, USA
Mirko Schoenitz
New Jersey Institute of Technology, Newark, New Jersey 07102, USA
Edward L. Dreizin
New Jersey Institute of Technology, Newark, New Jersey 07102, USA; Tomsk State University, Tomsk, 634050, Russia

要約

Nanocomposite thermite powders using aluminum as fuel with cobalt and bismuth fluorides as oxidizers were prepared by arrested reactive milling. Each material contained 50 wt% of aluminum and 50 wt% of a fluoride, resulting in fuel-rich compositions. The reactions in the prepared powders were characterized by thermo-analytical measurements; powders were ignited as coatings on an electrically heated filament and by electrostatic discharge. It was observed that the exothermic reactions begin in aluminum–metal fluoride thermites at lower temperatures than in any previously prepared reactive nanocomposites based on aluminum. Redox reactions in Al·CoF2 and Al·BiF3 nanocomposite started around 200 and 250°C, respectively. The results suggest that the initial reactions are rate-limited by the decomposition of fluorides. In the oxygenated environments, metals generated by reducing the starting fluorides oxidize readily. The newly formed oxides are rapidly reduced by excess aluminum, accelerating aluminum oxidation at low temperatures. The low-temperature thermally activated reactions lead to low ignition temperatures for the powders heated on the filament. Despite the low ignition temperatures, both prepared materials were relatively insensitive to ignition by an electric spark, making them attractive components of advanced energetic formulations.


Articles with similar content:

THERMOCHEMICAL PROPERTIES AND LASER-IGNITION PERFORMANCE OF Al/CuMoO4, Al/CuO/MoO3, Al/CuO AND Al/MoO3 NANOTHERMITES
International Journal of Energetic Materials and Chemical Propulsion, Vol.17, 2018, issue 4
Daniel Chamberland, David G. Kelly, Tommy Ringuette, Catalin Florin Petre
OXIDATION, IGNITION AND COMBUSTION OF AL-HYDROCARBON COMPOSITE REACTIVE POWDERS
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 4
Shasha Zhang, Mirko Schoenitz, Edward L. Dreizin
NG PLASTICIZED PE−PCP BINDER-BASED ADVANCED SOLID ROCKET PROPELLANTS: STUDIES ON MECHANICAL PROPERTIES
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 2
Haridwar Singh, Debdas Bhowmik, Shrikant M. Pande, Vaibhav S. Sadavarte
IGNITER COMPOSITIONS FOR LOVA AND DOUBLE-BASE PROPELLANTS CONTAINING KDN
International Journal of Energetic Materials and Chemical Propulsion, Vol.18, 2019, issue 2
E. Roth, Stefan Kelzenberg, Sebastian Knapp, Volker Weiser, A. Koleczko
FORMULATION, CASTING, AND EVALUATION OF PARAFFIN-BASED SOLID FUELS CONTAINING ENERGETIC AND NOVEL ADDITIVES FOR HYBRID ROCKETS
International Journal of Energetic Materials and Chemical Propulsion, Vol.14, 2015, issue 6
Thomas J. Curtiss, Eric Boyer, Daniel B. Larson, George Story, Trevor Wachs, Joseph H. Koo, John D. DeSain, Brian B. Brady, Kenneth K. Kuo, Russell Borduin