ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.28 SNIP: 0.421 CiteScore™: 0.9

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v8.i2.40
pages 133-145

'GREAT-DEPTH' ULTRASOUND MEASUREMENT ON LARGE-SCALE SOLID ROCKET MOTORS

Jeremy Couloumy
DGA/DE/CAEPE (Centre d'Achèvement et d'Essais des Propulseurs et Engins), Saint Médard en Jalles
Francois Colemard
DGA/DE/CAEPE (Centre d'Achèvement et d'Essais des Propulseurs et Engins), Saint Médard en Jalles
Gael Ducos
DGA/DE/CAEPE (Centre d'Achèvement et d'Essais des Propulseurs et Engins), Saint Médard en Jalles

要約

Ultrasonic measurements show a very good quality/cost ratio and are a non-intrusive technique that supplies the thickness variation and thermal behaviour of different materials inside the motor. They provide a comprehensive amount of data concerning the internal behaviour of the motor, such as instantaneous behaviour of internal thermal insulation wherever in the motor and instantaneous ballistic behaviour of the propellant grain during the test. This study deals particularly with 'Great-depth' transducers, which allow measurement of propellant up to 1-m thick. It covers acquisition from ignition to the end of a firing test, even on the largest motors such as ArianeV-P230 or VEGA-P80. 'Great-depth' ultrasonic measurement enables the replacement of heavy specific tests like live radiography or combustion stopped by drowning. Furthermore, it provides a large amount of live data from large-scale tests that could be included in simulation software in order to improve ballistic performance predicting. Knitline effect and edge effect, which generate local higher burning rate, are particularly tackled in this study.

参考

  1. Le Breton P., Ribereau, D., Marraud, C., and Lamarque, P., Experimental and Numerical Study of Casting Process Effects on Small Scale Solid Rocket Motor Ballistic Behavior.

  2. Ribereau, D., Dauch, F., Le Helley, P.H., Deoclezian, J.M., Cauty, F., and Pawlowski, M., Ultrasound Measurements on Full-Scale Solid Rocket Motor.

  3. Kuentzmann, P., Demarais, J.D., and Cauty, F., Mesure de la vitesse de combustion des propergols solides par ultrasons.

  4. Ballereau, S., Fouin, G., and Pawlowski, M., Advancements in Ultrasound Measurement on Large-Scale Solid Rocket Motors.


Articles with similar content:

APPROPRIATENESS OF BURNING RATE MEASURING TECHNIQUE WITH THE MEASURING CONDITIONS AND REQUESTED DATA
International Journal of Energetic Materials and Chemical Propulsion, Vol.17, 2018, issue 4
Ondrej Vodochodsky, Ahmed Maraden, Robert Matyas, Petr Stojan
BALLISTIC AND COMBUSTION PROPERTIES OF HIGH-PRESSURE EXPONENT HYDROCARBON-BASED FUEL-RICH PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
Gideon J. van Zyl
EXPERIMENTAL OBSERVATIONS ON DISRUPTIVE BURNING OF COATED ALUMINUM PARTICLES
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
Liang Wang, Ning Fei Wang, Minhua Liu, Huaqiang Liu
EVALUATION OF A LABORATORY-SCALE HYBRID ROCKET ENGINE'S PERFORMANCE
International Journal of Energetic Materials and Chemical Propulsion, Vol.13, 2014, issue 2
A. P. Trumpour, V. Brahmbhatt, David R. Greatrix, J. Karpynczyk
EXPERIMENTAL ANALYSIS METHOD OF THE TRANSIENT BURNING RATE OF SOLID PROPELLANT UNDER RAPID PRESSURE CHANGES
International Journal of Energetic Materials and Chemical Propulsion, Vol.13, 2014, issue 5
Boris S. Jankovski, Vladica S. Bozic