ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.142 SNIP: 0.16 CiteScore™: 0.29

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2011001444
pages 533-548

CHARACTERIZATION OF NOZZLE EROSION BEHAVIOR UNDER ROCKET MOTOR OPERATING CONDITIONS

Brian Evans
Pennsylvania State University, University Park, Pennsylvania 16802, USA
Kenneth K. Kuo
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802, USA
Andrew C. Cortopassi
The Pennsylvania State University, University Park, Pennsylvania, USA; The Aerospace Corporation, El Segundo, California, USA

要約

The performance deterioration of solid-rocket motors caused by nozzle throat erosion becomes more severe with increased operating pressure from higher rates of heat and mass transfer from the core flow to the nozzle surface. Understanding of the rocket nozzle throat erosion processes and developing methods for mitigation of erosion rate can allow motor operation pressures to be substantially higher than those of the existing propulsion systems. Two test rigs have been utilized in the study of nozzle throat erosion phenomena for G-90 grade graphite: an instrumented solid propellant motor (ISPM) and a solid-propellant rocket motor simulator (RMS). The X-ray translucent nozzle assembly used for the RMS and ISPM allows the real-time imaging of the nozzle throat station. It also has a feature for incorporating a nozzle boundary-layer control system to mitigate nozzle throat erosion rates. The RMS is a gaseous reactant combustor, which allows for control of product species compositions, their flow rates, and combustor operating pressure. The erosion process of G-90 graphite was also evaluated in the ISPM using both non-metallized and metallized composite solid propellants at nominal chamber pressures up to 26 MPa. A dimensionless nozzle throat erosion rate correlation in terms of the effective oxidizer mass fraction, chamber pressure, Reynolds number, and nozzle radius of curvature was developed for non-metallized propellant and RMS motor tests. The calculated erosion rates from the correlation showed agreement within ± 0.05 mm/s of the experimentally determined values. A separate correlation for nozzle erosion rates under metallized propellant heating was also developed. This correlation showed diffusion-limited behavior, since the oxidizer concentration effect is not important.


Articles with similar content:

NOZZLE EROSION CHARACTERIZATION IN A NON-METALLIZED SOLID-PROPELLANT ROCKET MOTOR SIMULATOR
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 3
Jeffrey D. Moore, Brian Evans, Patrick Kutzler, Eric Boyd, Peter J. Ferrara
ESTIMATION OF HEAT TRANSFER VARIATION AT SOLID PROPELLANT ROCKET NOZZLE
ICHMT DIGITAL LIBRARY ONLINE, Vol.8, 1996, issue
Mehmet Ali Ak, Huseyin Vural
PARAMETRIC INVESTIGATION ON SIMILARITY AND SCALE EFFECTS IN HYBRID MOTORS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
Alon Gany, R. D. Swami
APPROPRIATENESS OF BURNING RATE MEASURING TECHNIQUE WITH THE MEASURING CONDITIONS AND REQUESTED DATA
International Journal of Energetic Materials and Chemical Propulsion, Vol.17, 2018, issue 4
Ondrej Vodochodsky, Ahmed Maraden, Robert Matyas, Petr Stojan
EFFECT OF MAGNESIUM-COATED BORON PARTICLES ON BURNING CHARACTERISTICS OF SOLID FUELS IN HIGH-SPEED CROSSFLOWS
International Journal of Energetic Materials and Chemical Propulsion, Vol.2, 1993, issue 1-6
Vigor Yang, K. K. Pace, T. A. Jarymowycz