ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2013005383
pages 119-162

POLYMER NANOCOMPOSITES AS ABLATIVE MATERIALS−A COMPREHENSIVE REVIEW

Joseph H. Koo
University of Texas−Austin, Austin, Texas 78712, USA
M. Natali
Department of Civil and Environmental Engineering, University of Perugia, Terni, Italy
J. Tate
Ingram School of Engineering, Texas State University-San Marcos, San Marcos, Texas 78666, USA
E. Allcorn
Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78739, USA

要約

A comprehensive review was conducted on the research and development of polymer nanocomposites used as thermal protection systems (TPS) for re-entry vehicles and as nozzle and internal insulation materials for propulsion systems. This paper summarizes the significant R&D efforts on the studies of nanostructured ablative materials by scientists from China, India, Italy, Iran, and the US for the past decade. Thermoset, thermoplastics, elastomers, and thermoplastic elastomers were used as polymer matrices. Nanomaterials, such as montmorillonite organoclays, carbon nanofibers (CNFs), polyhedral oligomeric silssequioxanes (POSS), nanosilicas, nanoalumina, carbon black, and carbon nanotubes (CNTs) were incorporated into the different resin matrices as nanofillers. Conventional fibers, such as asbestos, carbon, glass, and silica, were used as reinforcements. Ablation mechanisms were studied and proposed by the researchers on their nanostructured ablatives.


Articles with similar content:

TRIBOMECHANICAL PERFORMANCE OF GLASS–EPOXY HYBRID COMPOSITES FILLED WITH MARBLE POWDER WITH THE TAGUCHI DESIGN AND ARTIFICIAL NEURAL NETWORK
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 1
Arun Kumar Rout, Subhrajit Ray, Ashok Kumar Sahoo
SOME PROSPECTS FOR THE USE OF CARBON NANOTUBES AS FUNCTIONAL ADDITIVES IN ELASTOMER COMPOSITES
Nanoscience and Technology: An International Journal, Vol.2, 2011, issue 3
Yu. V. Kornev, G. V. Kozlov, O. B. Yumashev, Yuri G. Yanovsky, Yulia N. Karnet
SPECIAL FEATURES OF THE MECHANICAL BEHAVIOR OF POLYMER/ORGANOCLAY NANOCOMPOSITES
Nanoscience and Technology: An International Journal, Vol.1, 2010, issue 1
B. Zh. Dzhangurazov, Georgii V. Kozlov, Gennady E. Zaikov, A. K. Mikitaev
Development and Production of Base Bleed Grain for 155 mm Rounds
International Journal of Energetic Materials and Chemical Propulsion, Vol.1, 1991, issue 1-6
Arthur Oppegard, Knut Melby, Steinar Haugen
QUANTUM-MECHANICAL SIMULATION OF THE MECHANISMS UNDERLYING THE INTERACTION OF EPOXY MATRICES WITH REINFORCING NANOFILLER PARTICLES OF DIFFERENT ORIGIN
Nanoscience and Technology: An International Journal, Vol.4, 2013, issue 2
S. M. Nikitin, Yuri G. Yanovsky, Yulia N. Karnet, E. A. Nikitina